Bleam

I don't have a right name for my project yet, but it'll come

So I'm going to make a little barebone to put on my case (full plexy thing)

In this barebone there will be 3 Black Ice Extreme's, 1 Eheim 1060, 1 self made reservoir for 2 liters, 4x120mm fans

Now for the coolblocks, I'm planning to PELT cool the stuff,

If I want to PELT cool my GPU/CPU/NB, how do I do that and what extra PSU shall I need?

Is it nessesary to cool the GPU/NB?

Block4CPU: Not sure whats the best of the best
Block4GPU: Swiftech MCW50-T
Block4NB : Not sure whats the best of the best

greetings :^)

piotke

if your'e not overclocking extreme, no pelt is needed on GPu or northbridge.

Remember, 1 psu won't be enough for 3 pelts.

PSU pelt (172 watt ? or more) is 1 dedicated SPU, probably 24V

GPU and northbridge is another, 12V psu, with enough of amps on the 12V rail.

Lots of juice needed, overkill.

Bleam

Well, If I buy an Antec 520W or something in that direction, should that be enough to feed 3 times 80w pelts ?



:grin:

Evangeliz

Probably it will be enough to feed 3*80w
but 1 of them will fry your cpu, because it's not enough for high performance cpu's

__________________
Changing job sux

piotke

why 3 times 80 watt ?

80 watt is not enough for cpu, is fine for GPU an heavy overkill for Northbridge....

3*80 watt on a 550 will be ok, if that's a dedicated PSU, not the one for your system.

Do not underestimate the power of pelts

__________________

Bosw8er

Looks like an expensive and dangerous solution.

Looks like you want very serious cooling but a prommy may be out of your budget.

I would recommend a chiller in stead of that pelt solution. So basically you'll buy and install your H20 setup and you hook up an external source to cool that water. Some people use an old fridge, some people buy el cheapo airco, ... some use ice cubes, ... sufficient possibilities and fairly trustworthy.

You only have to watch out for condensation.

Here ya go, have fun
http://www.daocplace.com/index.php?article=acrylic
http://www.overclockers.co.nz/ocnz/c...atsink/2.shtml
http://www.overclockers.com/tips1043/

__________________
"Think of how stupid the average person is, and realize half of them are stupider than that."

Bleam

The Idea is to put everything in an extra (old case that aren't built in height but in length) case ...

so, all pc parts in my case, and all: pumps, rads, PSU for pelt's, res, just everything from the WC in one case and put it underneat it or on it...

Bleam

Waterblock's, it's all about waterblocks, which ones should I buy in your opinion

I don't care if it's overkill, I want to assemble the BEST WC there could be, no mather what price

piotke

waste of money in my humble opinion, for that price you'll be able to buy a prom

__________________

Bleam

Had one, borked one, no thanks again