prescott and black ice extreme

quarantaine · 24th December 2004, 10:00

i just bought me a secondhanded black ice extreme to get more room in my case (instead of my heatercore)
but when i now compare those 2 , there is a HUGE difference in cooling area.
i'm doubting it can cool a P4 3.0 @ 3.8 prescott (will put out 150W on load?) and the chipset.
i want relative silence so a high cfm fan is not an option and yet i want max 55° (for stability and the thermal throtteling)

http://quarantaine.mongtastic.be/rads for the comparison pictures

anyone got an idea if this will work?

kristos · 24th December 2004, 11:51

depends, what are your temps now?

wutske · 24th December 2004, 12:09

Dunno if this is usefull.
http://www.overclockers.com/articles1140
(! For watts, multiply BTU/Hr x 0.2932

If you want to know the heat output of your cpu:
http://newstuff.orcon.net.nz/wCalc.html

tought 89W at stock speed and volt (1.4V) and 84W for the LGA version (same speed, same volt)

koensa · 24th December 2004, 23:26

tryd it here to, gpu and cpu with a single 120mm rad is not an option
it was a ti4600 and 3.0, then i took car rad and temps were much better

with bi i had around 65!!

quarantaine · 25th December 2004, 09:51

Quote:

Originally posted by koensa
tryd it here to, gpu and cpu with a single 120mm rad is not an option
it was a ti4600 and 3.0, then i took car rad and temps were much better

with bi i had around 65!!

bah, i bought that radiator for nothing then

i should think before acting next time...

24th December 2004, 10:00	#1
quarantaine Member Join Date: Jun 2002 Posts: 244	prescott and black ice extreme i just bought me a secondhanded black ice extreme to get more room in my case (instead of my heatercore) but when i now compare those 2 , there is a HUGE difference in cooling area. i'm doubting it can cool a P4 3.0 @ 3.8 prescott (will put out 150W on load?) and the chipset. i want relative silence so a high cfm fan is not an option and yet i want max 55° (for stability and the thermal throtteling) http://quarantaine.mongtastic.be/rads for the comparison pictures anyone got an idea if this will work?

24th December 2004, 11:51	#2
kristos Member Join Date: Jan 2004 Posts: 1,554	depends, what are your temps now? __________________ "Welcome to the internet; where men are men, women are men, and little girls are FBI agents."

24th December 2004, 12:09	#3
wutske Member Join Date: May 2003 Location: Apenland Posts: 2,018	Dunno if this is usefull. http://www.overclockers.com/articles1140 (! For watts, multiply BTU/Hr x 0.2932 If you want to know the heat output of your cpu: http://newstuff.orcon.net.nz/wCalc.html tought 89W at stock speed and volt (1.4V) and 84W for the LGA version (same speed, same volt) __________________ /me = Hardfreak My Blog: [W]eblog

24th December 2004, 23:26	#4
koensa Member Join Date: Oct 2002 Location: Kortrijk Posts: 741	tryd it here to, gpu and cpu with a single 120mm rad is not an option it was a ti4600 and 3.0, then i took car rad and temps were much better with bi i had around 65!! __________________ I reject your reality,and i substitute my own

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Alphacool NexXxos BOLD vs Prescott, Intel's Black Sheep	jmke	Articles & Howto's	0	10th March 2005 11:59