GOD dajjjum! waterleaking extreme fun :) - Page 3

biCker · 30th September 2003, 23:13

here's something I don't understand: all around you find people saying their stressed temp is hoovering around 30-35c° with wc. I did the typhoon review and ended at 45° after 1/2 hour stressing (43° now with thermal paste reapplyed) stressed on my PIV. Now this block should be top end and does 39° already after a few minutes.

Are they all lying or what?

jmke · 1st October 2003, 05:18

lower room temps.. bigger reservoir.. better radiator... faster fans.. a lot of different factors!

1st October 2003, 06:28

different temperature sensors

jmke · 1st October 2003, 06:54

etc etc
to really compare results one should use the same components as much as possible.

The Senile Doctor · 2nd October 2003, 21:22

teus friggin repaired the block, I got it tonite, went to a meeting with doctors at nine, raced back home after the introduction (45 minutes), set up the waterblock... and looked at sth unbelievable

checked, doublechecked, used different programs, just two hours ago this was 65 °C on a stock heatsink with goop, now it's 1 degree above mobo temp, ambient is 20°C, idle at 3 ghz stock voltage, nanotherm used, pelt on gpu

The Senile Doctor · 2nd October 2003, 21:23

forgot the attach

using nanotherm on alcoholized heatsink

RichBa5tard · 2nd October 2003, 21:25

Quote:

Originally posted by calantak
THE best waterblock ever conceived and critics rave!

The Senile Doctor · 2nd October 2003, 21:26

god dajjum again

priming below 30°C with water

case cooled with 2*120mm(front and side) in, two times 120 mm out on rad (top) and two papst rear (top)

RichBa5tard · 2nd October 2003, 21:29

Seems like your 600l/h pump is powerful enough to cool gpu, cpu & a dual rad!

The Senile Doctor · 2nd October 2003, 21:34

apparently this setup rocks... i'm priming @ 1.6 actual volts (but fluctuating!) 3600 mhz and it shows a temp of mobo 23°C and cpu after 10 minutes of prime : 33°C...

whopping for a WC, who needs a 40 pound 1000 dollar prometeia

, I have a 1 pound 70 dollar d-tek whitewater,and it seems to boot at 3800 mhz

@ bicker : sorry dude, but this is waaaaay colder, and I never lie, what's the fun in that??? this is staying waaaay below 40°C (33-35 to be exact) with 3600+ mhz prime95 for 20 minutes now

, you have to know I'm using dual 120mm rad with about 200cfm sucking the heat out, two cold 120mm's doing 150 cfm in (one directly on gpu+cpu+ nb region), an actively cooled nb, and another two papst delivering cpuregionheat out of the case

1st October 2003, 05:18	#22
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 78,419	lower room temps.. bigger reservoir.. better radiator... faster fans.. a lot of different factors! __________________

1st October 2003, 06:54	#24
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 78,419	etc etc to really compare results one should use the same components as much as possible. __________________

2nd October 2003, 21:22	#25
The Senile Doctor [M] Reviewer Join Date: May 2002 Location: wherever the doom is Posts: 3,171	teus friggin repaired the block, I got it tonite, went to a meeting with doctors at nine, raced back home after the introduction (45 minutes), set up the waterblock... and looked at sth unbelievable checked, doublechecked, used different programs, just two hours ago this was 65 °C on a stock heatsink with goop, now it's 1 degree above mobo temp, ambient is 20°C, idle at 3 ghz stock voltage, nanotherm used, pelt on gpu __________________ OC-2-the-death Where the Reverend is doing his Magick, all mortals be silent Doom over the world

2nd October 2003, 21:23	#26
The Senile Doctor [M] Reviewer Join Date: May 2002 Location: wherever the doom is Posts: 3,171	forgot the attach using nanotherm on alcoholized heatsink __________________ OC-2-the-death Where the Reverend is doing his Magick, all mortals be silent Doom over the world

2nd October 2003, 21:26	#28
The Senile Doctor [M] Reviewer Join Date: May 2002 Location: wherever the doom is Posts: 3,171	god dajjum again priming below 30°C with water case cooled with 2*120mm(front and side) in, two times 120 mm out on rad (top) and two papst rear (top) __________________ OC-2-the-death Where the Reverend is doing his Magick, all mortals be silent Doom over the world

30th September 2003, 23:13	#21
biCker [M] Reviewer Join Date: May 2002 Posts: 1,185	here's something I don't understand: all around you find people saying their stressed temp is hoovering around 30-35c° with wc. I did the typhoon review and ended at 45° after 1/2 hour stressing (43° now with thermal paste reapplyed) stressed on my PIV. Now this block should be top end and does 39° already after a few minutes. Are they all lying or what?

1st October 2003, 06:28	#23
TeuS Posts: n/a	different temperature sensors

2nd October 2003, 21:29	#29
RichBa5tard [M] Reviewer/HWBot ***** Join Date: May 2002 Posts: 3,344	Seems like your 600l/h pump is powerful enough to cool gpu, cpu & a dual rad! __________________ HTPC (mac osx): Mac Mini \| Core Duo 1.6Ghz \| 2GB DDR2 \| 26\" TFT Development (mac osx): Macbook \| Core 2 2.0Ghz \| 4GB DDR2 \| 250GB HD Games (win xp): E2160 @ 2.4Ghz \| HD3850 OC \| Asrock 4coredual-vsta \| 2GB DDR2

2nd October 2003, 21:34	#30
The Senile Doctor [M] Reviewer Join Date: May 2002 Location: wherever the doom is Posts: 3,171	apparently this setup rocks... i'm priming @ 1.6 actual volts (but fluctuating!) 3600 mhz and it shows a temp of mobo 23°C and cpu after 10 minutes of prime : 33°C... whopping for a WC, who needs a 40 pound 1000 dollar prometeia , I have a 1 pound 70 dollar d-tek whitewater,and it seems to boot at 3800 mhz @ bicker : sorry dude, but this is waaaaay colder, and I never lie, what's the fun in that??? this is staying waaaay below 40°C (33-35 to be exact) with 3600+ mhz prime95 for 20 minutes now , you have to know I'm using dual 120mm rad with about 200cfm sucking the heat out, two cold 120mm's doing 150 cfm in (one directly on gpu+cpu+ nb region), an actively cooled nb, and another two papst delivering cpuregionheat out of the case __________________ OC-2-the-death Where the Reverend is doing his Magick, all mortals be silent Doom over the world

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Corsair® Launches 256GB Extreme Series SSD	jmke	WebNews	0	31st August 2009 08:19
OCZ Technology Introduces Intel Extreme Memory Profile (XMP) SODIMMs	jmke	WebNews	0	10th April 2009 15:42
Intel® X25-E Extreme SATA Solid-State Drive Starts Shipping	jmke	WebNews	6	16th October 2008 22:00
OCZ Technology Introduces the Latest DDR3 Kits within the Intel Extreme Memory Series	jmke	WebNews	0	3rd July 2008 09:13
Leadtek First to Bundle PX8600 GTS & PX8600 GT with Lost Planet™: Extreme Condition	jmke	WebNews	2	5th July 2007 17:05
Leadtek WinFast® PX8500 GT TDH Extreme	jmke	WebNews	0	21st June 2007 08:40
ASUS introduces Striker Extreme Motherboard	jmke	WebNews	1	15th November 2006 20:11
ECS KN1 Extreme motherboard	Sidney	WebNews	0	17th June 2005 17:05
Intel Discontinues Pentium 4 Extreme Edition in Older Form-Factor	jmke	WebNews	0	28th February 2005 13:27