It appears you have not yet registered with our community. To register please click here...

 
Go Back [M] > Hardware Madness > Air - Water - Peltier - Phase Change - LN2 Cooling Projects
Benefits self-applied thermal grease Benefits self-applied thermal grease
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read


Benefits self-applied thermal grease
Closed Thread
 
Thread Tools
Old 16th November 2006, 13:36   #1
Pistons
 
Posts: n/a
Default Benefits self-applied thermal grease

Most of the heatsinks today come with pre-applied thermal interface material. Would there be a noticeable difference in temperature if I applied my own Arctic silver 5 instead of the pre-applied material ?
 
Old 16th November 2006, 13:51   #2
Madshrimp
 
jmke's Avatar
 
Join Date: May 2002
Location: 7090/Belgium
Posts: 78,577
jmke has disabled reputation
Default

2-5C max. I think. if you can do it; do it. if you didn't do it; not worth the hassle of removing the cooler & doing it

that's in my humble opinion
__________________
jmke is offline  
Old 16th November 2006, 14:15   #3
[M] Reviewer
 
geoffrey's Avatar
 
Join Date: Nov 2004
Posts: 4,118
geoffrey Fully Registeredgeoffrey Fully Registeredgeoffrey Fully Registeredgeoffrey Fully Registeredgeoffrey Fully Registeredgeoffrey Fully Registeredgeoffrey Fully Registeredgeoffrey Fully Registered
Default

I wouldn't do it, even if the cooler is not yet installed.

Why
-> You will not notice it when you use your PC.

- overclock will not ingrease, or maybe 10MHz.
- lifetime will ingrease a little bit in theorie, but who cares if you are about to sell it again between this and 5 years (wich is allready a long period when talking about PC's)


If you are getting bad CPU temps, it is advised to reinstal your heatsink. In that case I would stick with AS5, because you will have to clean the heatsink base anyway. Although white goop does the job just fine, and it's not electrical conductive.
__________________

geoffrey is offline  
Old 16th November 2006, 19:14   #4
EsaT
 
Posts: n/a
Default

I think some review mentioned that TIM with cooler on your profile is very near AS5.


Instead I would recommend changing those in your motherboard.
Asus has put some very crappy "wall putty" under chipset heatsinks of P5W DH.

Maybe with south bridge difference might not be so notable because there's wide area transferring heat but under northbridge heatsink situation is quite horrible: Because of bare die heat transferring area is very small (in class of 10x10mm) and then there's near half millimeter thick padding of that putty between it and heatsink!
 
Old 16th November 2006, 19:36   #5
Pistons
 
Posts: n/a
Default

Thank you for this tip EsaT. I will see what I can do replacing that stuff with the AS5.
 
Closed Thread


Similar Threads
Thread Thread Starter Forum Replies Last Post
Arctic Cooling MX-3 Thermal Grease Review jmke WebNews 0 27th January 2010 09:17
Tuniq TX-3 Thermal Grease Review jmke WebNews 0 13th November 2009 11:04
80 Thermal Pastes Compared. Eighty. Eight Zero. jmke WebNews 2 15th June 2009 18:20
PR: Scythe Thermal Elixer - High Performance Thermal Grease jmke WebNews 0 16th January 2009 17:57
ZeroTherm ZT-100 Thermal Grease Review jmke WebNews 0 7th September 2007 16:14
Thermal Grease and CPU Gandiva Hardware/Software Problems, Bugs 3 4th May 2007 23:45
Diamond Thermal Grease Testing jmke WebNews 4 24th January 2007 08:23
Zalman Super Thermal Grease Sidney WebNews 0 30th July 2006 02:55
Thermax Tech XtFlux-GA Thermal Grease jmke WebNews 0 18th December 2005 14:05
Using Both Thermal Grease and Thermal Adhesive to attach Heatsinks jmke WebNews 0 4th September 2004 12:31

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


All times are GMT +1. The time now is 13:37.


Powered by vBulletin® - Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO