VIA KT400 Chipset Overclocking Quote:
|
Nice work ! Should rename it: "VIA KT400 Chipset si teh suXor ! " :D What about hyperion (http://www.viaarena.com/?PageID=211) ? What's the influence on the benchies ? |
would be cool if: a) I had the motherboards & other hardware still in my possesion b) the R9700Pro worked on the KT400 :) :-) |
why didN'T you put a nforceII in the review? so that we good see how mutch the kt400 sucks ;) silencer |
Hmmm... not a bad idea silencer. JMKe, shall I make a quick run of DCDDR running at 133/166/200FSB? It would make a nice comparison. :) Awesome work by the way. How did you make those 1337 graphs? :ws: |
you're kidding right.. about the graphs? :p Excell man.. please.. go out and buy it, there's a students pack out that includes alot of otherwise very $$$ stuff, for only 100€ or so :) yes please & add them to the mentioned thread :) anywayz to answer to Silencer's question: I didn't add the nForce2 cause at the time of testing the nForce2 wasn't out yet :) but Comtech has shown interest in this, so I might be reviewing 2-3 nForce2 mobo's very soon Epox & Asus are pretty sure, maybe the Abit will follow also :) |
thx for the answer and correction of my English. btw nice review silencer |
Here are some epox 8rda+ benches at 7-2-2 CL2: @133fsb 2075/1997 @166fsb 2582/2468 @200fsb 3104/2920 I don't think sisoft is a good way to bench an nforce mobo though. It cearly states to use 64bit data packets to bench, which is the bandwith of single channel ddr... i wouldn't be suprised if i would get exactly the same results with just 1 stick. And yes i'll stop being a cheap arse and start spending money on software. :^) |
those numbers indeed suck compared to the KR7A @ 200 :) I know sisoft is not the way to bench/compare motherboards but reallife gaming software benches weren't possible due to the fact that the R9700Pro failed to work otherwise I had included: PCMark2002 3DMark2K1 QuakeIII Serious Sam UT2003 I had these done on the KT3, as this was the first motherboard I installed, but.. well.. you know.. a TNT2 doesn't really make it an even challenge :) |
They don't 'suck', but it just doesn't reflect the performance gain you get from dcddr in real life apps. By the way, this epox nforce˛ at 200FSB is still faster than my ol' KR7A at 205FSB. 3104/2920 <> 3055/2730 |
yes but it sux concidering it has DCDDR in real life apps you will find that the gap will be bigger I hope Mr ICEE's KX7 arrives soon (and of course the XP2200+) , so I can use it to compare to the nForce2 mobo's |
Hmmm, there seems to be a slight difference after all. Except at stock speed: epox 8rda+ 7-2-2 cl2 @200fsb DCDDR 3104/2920 SCDDR 3021/2793 @166fsb DCDDR 2582/2468 SCDDR 2485/2329 @133fsb DCDDR 2075/1997 SCDDR 2066/1991 |
well that makes it pretty clear that Sisoft Sandra can't handle DCDDR in a way that you can notice the reallife difference for once the tables are turned usually you see a difference in Benchmarks but not in real life apps :) |
Received this one by mail, don't have the opportunity to test it out :( but hope it can help someone out Quote:
thanks go out to RAdZer0 for this info! |
I have a Soyo Dragon KT400 Ultra Platinum and a ATI Radeon 9700 Pro. I haven't had any problem with the video card. These video cards and motherboards have a real problem with power supplies that are too small or borderline on voltages. They recommend a 350W or higher. I use a 500W myself. :super: |
indeed, I came across this info on other forums, but the system booted fine on the Gigabit & MSI KT3, but failed on the Asus & KT4, I didn't have a 400+watt PSU available so I was unable to test that. But I find it strange it did work on the other 2! thanks for your comment! Bosw8er, a local member here, has always been crazy about the Soyo motherboards cause of their all-in-one nature! you enjoying yours? :) |
Yes, I love it. It's the only motherboard I've used that is that reliable and sets up the same no matter what version you use. |
Hmm then . . . What's the best performance setting for the msn kt4 400 with 3200 rambus and Athlon xp 2600 + ??? I mean fsd and other datas ?? |
afaik rambus never made it to the AMD platform :) put in the lowest timings CL2 2-5-2 CMD rate 1T |
All times are GMT +1. The time now is 23:02. |
Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO