Cooljag coolers

Sidney · 17th August 2004, 21:09

Low cost AXP

Rated highly but noisy S-478

Lowest temp reported by Frostytech
http://www.frostytech.com/articlevie...id=1621&page=5

K8 - means I have to get an A64 system.

Three arrived today; contacted last Thursday = Fast service

About Cooljag

http://www.cooljag.com/about_us.htm

Jmke,
If you want, I could do the S478 and S462 in one article.

jmke · 17th August 2004, 21:38

would be cool

Sidney · 18th August 2004, 05:44

Took a few close up pictures; I am impressed with the quality and overall finish; especially the close to mirror finish; smooth contact areas to the CPU on both S-478 and S-462.

S-478 has "bulb type" temp sensor.

I will just compare them with Arctic Cooling 4 Pro and 2L, since both they are in the test rigs.

--------------------------------------------------------------------------------

Done with all pics...data from current systems (re-ran everything to have all current data). Should be done by tomorrow if not, may just be another day. Hope they deliver as they did in looks.

Sidney · 18th August 2004, 16:24

Problem already..... the thermal control fan in well ventilated case refuses to turn over 1600 rpm; when it gets to speed around 2400, the CPU temp has already jumped to over 68C. With a 70mm fan @1600 rpm, I'm not going anywhere using 2.8C.

Switched to 70x70x25 fan that came with the AXP cooler with no thermal sensor - running now; called the manufacturer and left the guy a message to call back.

jmke · 18th August 2004, 17:53

that's indeed a bit hot

Sidney · 18th August 2004, 18:25

More news/problem

Design overlook - Heatsink won't sit flush with CPU due to the 4 plugs that hold the P4 retention are protruding on certain boards. Manufacturing tests were done with Intel, MSI and Tyan boards with the plugs flushed (recessed).

Both Asus and Abit are with the plugs protruding (not flushed).

Sidney · 19th August 2004, 03:47

Jmke,

Please check PM. Both reviews done. What a mess.

Sidney · 30th August 2004, 17:45

Rather intesting with the A64 Cooler -

1) Preliminary dimensions show 80mm fan could be installed instead of 70x15 that came with.

2) Can't say why a retention bracket is included.

3) Base finish is nothing to write about; machine marks could be seen and felt.

Frostytech came back and I notice the data listed on the 66IC was reversed.

17th August 2004, 21:09	#1
Sidney Member Join Date: Mar 2004 Posts: 15,738	Cooljag coolers Low cost AXP Rated highly but noisy S-478 Lowest temp reported by Frostytech http://www.frostytech.com/articlevie...id=1621&page=5 K8 - means I have to get an A64 system. Three arrived today; contacted last Thursday = Fast service About Cooljag http://www.cooljag.com/about_us.htm Jmke, If you want, I could do the S478 and S462 in one article. __________________ lazyman Opteron 165 (2) @2.85 1.42 vcore AMD Stock HSF + Chill Vent II

17th August 2004, 21:38	#2
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	would be cool __________________

18th August 2004, 05:44	#3
Sidney Member Join Date: Mar 2004 Posts: 15,738	Took a few close up pictures; I am impressed with the quality and overall finish; especially the close to mirror finish; smooth contact areas to the CPU on both S-478 and S-462. S-478 has "bulb type" temp sensor. I will just compare them with Arctic Cooling 4 Pro and 2L, since both they are in the test rigs. -------------------------------------------------------------------------------- Done with all pics...data from current systems (re-ran everything to have all current data). Should be done by tomorrow if not, may just be another day. Hope they deliver as they did in looks. __________________ lazyman Opteron 165 (2) @2.85 1.42 vcore AMD Stock HSF + Chill Vent II

18th August 2004, 16:24	#4
Sidney Member Join Date: Mar 2004 Posts: 15,738	Problem already..... the thermal control fan in well ventilated case refuses to turn over 1600 rpm; when it gets to speed around 2400, the CPU temp has already jumped to over 68C. With a 70mm fan @1600 rpm, I'm not going anywhere using 2.8C. Switched to 70x70x25 fan that came with the AXP cooler with no thermal sensor - running now; called the manufacturer and left the guy a message to call back. __________________ lazyman Opteron 165 (2) @2.85 1.42 vcore AMD Stock HSF + Chill Vent II

18th August 2004, 17:53	#5
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	that's indeed a bit hot __________________

18th August 2004, 18:25	#6
Sidney Member Join Date: Mar 2004 Posts: 15,738	More news/problem Design overlook - Heatsink won't sit flush with CPU due to the 4 plugs that hold the P4 retention are protruding on certain boards. Manufacturing tests were done with Intel, MSI and Tyan boards with the plugs flushed (recessed). Both Asus and Abit are with the plugs protruding (not flushed). __________________ lazyman Opteron 165 (2) @2.85 1.42 vcore AMD Stock HSF + Chill Vent II

19th August 2004, 03:47	#7
Sidney Member Join Date: Mar 2004 Posts: 15,738	Jmke, Please check PM. Both reviews done. What a mess. __________________ lazyman Opteron 165 (2) @2.85 1.42 vcore AMD Stock HSF + Chill Vent II

30th August 2004, 17:45	#8
Sidney Member Join Date: Mar 2004 Posts: 15,738	Rather intesting with the A64 Cooler - 1) Preliminary dimensions show 80mm fan could be installed instead of 70x15 that came with. 2) Can't say why a retention bracket is included. 3) Base finish is nothing to write about; machine marks could be seen and felt. Frostytech came back and I notice the data listed on the 66IC was reversed. __________________ lazyman Opteron 165 (2) @2.85 1.42 vcore AMD Stock HSF + Chill Vent II

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Corsair® Launches Air Series A70 and A50 High-Performance CPU Coolers	jmke	WebNews	0	2nd March 2010 09:05
New CPU Coolers from Nexus: FLC-3000, XiR-2300 and XiR-3500	jmke	WebNews	1	9th December 2009 09:04
Extended LGA 1156 and LGA 1336 socket compatibility for Scythe CPU Coolers	jmke	WebNews	0	23rd July 2009 15:05
Spire jumps onboard the Core i5 after-market coolers train with new model of CoolWave	jmke	WebNews	0	20th May 2009 09:52
CoolJag Falcon 92-Cu and Falcon 92-Al CPU Coolers	jmke	Articles & Howto's	1	3rd May 2009 21:02
[M] CoolJag Falcon 92-Cu and Falcon 92-Al CPU Coolers	jmke	WebNews	0	15th March 2009 18:57
Scythe updates AM2/K8 Mounting Gear for CPU Coolers	jmke	WebNews	0	20th December 2008 20:46
OCZ Technology Unveils the Gladiator and Gladiator Max CPU Coolers	jmke	WebNews	0	12th September 2008 07:26
Evercool CPU and Notebook Coolers	jmke	WebNews	0	1st August 2007 12:07