Chaintech 9CJS ZENITH - Page 24

13th August 2005, 13:54

Quote:

Originally posted by Victorious25
I now have a 5.1 speaker system, and want to use it with my system. I try plugging it into the multi media card that has 7.1 audio and firewire. No audio is played. The speakers do work, thoguh, becasue if I plug it into the normal audio jacks they function as a 2.1 system. I don't know if I don't have the proper drivers or what. How do I get this to work?

\

The jumpers are mis-identified on the picture and on the Chaintech card AV710). The jumpers on "J7 are not only going the wrong direction there's one too many! Pin 1 & 2 run vertically, and there's only 1 ea. of pin one and two. It took me two days to figure this out. I'm so worn out that I'm notr going to complain to the chaingang.

13th August 2005, 13:55

The jumpers are mis-identified on the picture and on the Chaintech card AV710). The jumpers on "J7 are not only going the wrong direction there's one too many! Pin 1 & 2 run vertically, and there's only 1 ea. of pin one and two. It took me two days to figure this out. I'm so worn out that I'm notr going to complain to the chaingang. Sorry, it demanded that I post this again??L!!@#?

24th August 2005, 23:19

i need to flash my bios to install new prescott cpu i've never done this before

i've downloaded the latest bios and flash utility

alt + f2 doesn't work and i dont know how to create a bootable cd or floppy. can anyone give me some advice on what to do.

24th August 2005, 23:23

i've tried drdflash but i get a error
"disk error on track 19, head 1 address mark not found"

26th August 2005, 00:01

i've just tried the create ms-dos boot disk option in my computer but that didn't work when i tried to boot from it (this is really starting to do my head in)

26th August 2005, 00:48

got drdflash to work copied bios and flash utility to the floppy but when A:> appeared on screen my usb keyboard wouldn't work. do i need a ps2 keyboard to use this disk?

30th August 2005, 18:12

finally done it but my hard drive wasn't recognized afterwards, 2 days and a lot of searching after and i realised that the onboard sata controller(i think thats what it called anyway) had been disabled during flash. and i was just about to bin my hdd aswell!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Chaintech VNF4 Ultra Zenith VE motherboard	jmke	WebNews	0	5th August 2005 15:08
Chaintech VNF4 Zenith VE	Sidney	WebNews	2	23rd July 2005 16:06
Chaintech VNF4 Ultra Zenith VE	Sidney	WebNews	1	29th June 2005 12:22
Chaintech Zenith 9CJS - BIOS Updates	trebor1870	General Madness - System Building Advice	1	26th May 2005 21:32
Chaintech VNF4 Zenith Value Edition	Sidney	WebNews	0	24th May 2005 04:25
Chaintech Zenith VNF4 Ultra	Sidney	WebNews	0	28th April 2005 20:34
Chaintech VNF4 Ultra ZENITH VE	Sidney	WebNews	0	7th April 2005 22:28
CHAINTECH VNF4 ULTRA Zenith VE Available in stores	jmke	WebNews	2	22nd February 2005 13:52
Chaintech 9cjs and BIOS DOS setting for Symantec Ghost	Kerry	General Madness - System Building Advice	19	15th December 2004 21:33
Chaintech Zenith ZNF3-250	jmke	WebNews	0	19th June 2004 11:33

13th August 2005, 13:55	#232
simon001 Posts: n/a	The jumpers are mis-identified on the picture and on the Chaintech card AV710). The jumpers on "J7 are not only going the wrong direction there's one too many! Pin 1 & 2 run vertically, and there's only 1 ea. of pin one and two. It took me two days to figure this out. I'm so worn out that I'm notr going to complain to the chaingang. Sorry, it demanded that I post this again??L!!@#?

24th August 2005, 23:19	#233
mrfabulous Posts: n/a	i need to flash my bios to install new prescott cpu i've never done this before i've downloaded the latest bios and flash utility alt + f2 doesn't work and i dont know how to create a bootable cd or floppy. can anyone give me some advice on what to do.

24th August 2005, 23:23	#234
mrfabulous Posts: n/a	i've tried drdflash but i get a error "disk error on track 19, head 1 address mark not found"

26th August 2005, 00:01	#235
mrfabulous Posts: n/a	i've just tried the create ms-dos boot disk option in my computer but that didn't work when i tried to boot from it (this is really starting to do my head in)

26th August 2005, 00:48	#236
mrfabulous Posts: n/a	got drdflash to work copied bios and flash utility to the floppy but when A:> appeared on screen my usb keyboard wouldn't work. do i need a ps2 keyboard to use this disk?

30th August 2005, 18:12	#237
mrfabulous Posts: n/a	finally done it but my hard drive wasn't recognized afterwards, 2 days and a lot of searching after and i realised that the onboard sata controller(i think thats what it called anyway) had been disabled during flash. and i was just about to bin my hdd aswell!