hello :hello: nintari , thanks for dropping by, Quote:
But when turning down the rheobus dial to the lowest setting we hear an unpleasant sound coming from the HSF setup, the fan vibrates at lower RPM and the housing to which it is attached on the Hyper6 starts to make a ringing noise which stops as soon as you lay your hand on the top. Placing rubbers at the top of the heat pipes between fan mounting bracket should resolve this issue. The noise of the Cooler Master at low speed with the ringing sound was almost as taxing as using the Tornado fan at full speed, not a good sign.
| when using the Tornado fan I didn't experience the ringing noise from the fan mounting case. if you move the case from side to side you'll notice it touches the tops of the 6 heat pipes causing "some metal noise", now if the that cage would start trembling, as with the fan @ low speed, then you get quite an irritating noise.
check the link in my previous post for more reviews, not everyone experienced this "ringing" though. |