| Thread Tools |
31st March 2003, 16:59 | #31 |
Madshrimp Join Date: May 2002 Location: 7090/Belgium
Posts: 79,021
| thank BDke! If you're interested I can throw together a small article with your experiences of the SLK800U, send me an email if you want to help us out jmke@madshrimps.be thanks in advance!
__________________ |
24th April 2003, 19:29 | #32 |
Posts: n/a
| Aalraajt. BDke has installed his SLK800U with a 80mm YS-tech cooler. Difference between the intel stock cooler is that the SLK800U is very heavy and looks awesome. I'll post some test results. Intel Stock Cooler Idle - Not oc'ed -> 42° - Oc'ed (2.53@2983) -> 55° 100% Load during 10 minuts - Not oc'ed -> 55° - Oc'ed (2.53@2983) -> 63° Thermalrigh SLK800U with YS-tech 80mm Idle - Not oc'ed -> 38° - Oc'ed (2.53@2983) -> 41° 100% Load during 10 minuts - Not oc'ed -> 45° - Oc'ed (2.53@2983) -> 52° All test are runned with a Intel P4 2.53 on Asus P4PE. During overclocking the fsb went to 158mhz and Vcore @ 1.625v ROCKSTABLE. Now my P4 is running @ 2850mhz without touching the Vcorce (1.5v) ROCKSTABLE!!!!! While oc'ing with the intel stock cooler I had to use 1.650v cause it wouldn't run stable enough. This is a small user experience with the SLK800u. Questions? just ask |
24th April 2003, 19:49 | #33 |
Posts: n/a
| did you use the same compound for both heatsinks (with other words: not the thermal pad) ? |
24th April 2003, 20:06 | #34 |
Posts: n/a
| I used the same compound yes. It's low budget. I got it from a friend but i am going to buy some arctic silver soon. The temp may drop some more. And then i'll put 3*120mm papst fans in my case for an optimal airflow and i hope that will cool of the cpu as well |
24th April 2003, 22:17 | #35 |
Madshrimp Join Date: May 2002 Location: 7090/Belgium
Posts: 79,021
| great results, comes to show the SLK800 is worth its money if you put it to good use like you did thanks for your input BDke!
__________________ |
25th April 2003, 12:15 | #36 |
Posts: n/a
| np dude |
26th April 2003, 17:19 | #37 |
Posts: n/a
| I'm a little confused, does my Swiftech MX-462 still stands it ground, or is it become oldfashion and I should change cooling? |
29th May 2003, 15:07 | #38 |
Posts: n/a
| if it still stands ground, why bother spending money on something you don't need? buy something else instead and purchase a new cooler when needed |
2nd June 2003, 12:16 | #39 |
Posts: n/a
| ok, i'm going to buy a new cooler. Now i have a zalman with a amd xp 2000+ (palomino ). I had to lower my Vcore (now 1.675) because of the temps (now - normal use with folding- cpu: 58°). i don't know which HS to buy. I doubt between a slk800 or slk900. Is the difference big between a slk800 and an slk900u (with zalman fan deliverd with my old cooler - CNPS6000CU ) |
2nd June 2003, 13:47 | #40 |
Posts: n/a
| another advantage or ... SLK800 to SLK900 blowing air through fans doesn't blow hot air towards grafix card with 800 and does with 900 casefan comes more handy with 800 than 900 on the other hand 900 blows wind towards PSU with fan on bottom but hey we use a backcasefan , don't we! |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Direct2D: Hardware Rendering a Browser - Firefox Performance Tested | jmke | WebNews | 0 | 25th November 2009 11:44 |
Intel Core i9 2.4ghz, 6-Core Gulftown, Performance and Power Consumption Tested | jmke | WebNews | 1 | 23rd November 2009 09:32 |
CPU Virtualization Performance Tested | jmke | WebNews | 0 | 21st May 2009 11:39 |
Anno 1404 (Dawn of Discovery) Performance Tested | jmke | WebNews | 0 | 12th May 2009 09:04 |
OCZ Gladiator MAX CPU Cooler Tested | jmke | Articles & Howto's | 1 | 3rd May 2009 21:01 |
ATI Radeon HD 4890 Overclocked Performance Tested | jmke | WebNews | 0 | 29th April 2009 07:31 |
[M] Mushkin Does Liquid Cooling! eXtreme Performance Liquid Tested | jmke | WebNews | 1 | 31st March 2009 22:49 |
[M] OCZ Gladiator MAX CPU Cooler Tested | jmke | WebNews | 0 | 31st March 2009 18:19 |
ATI Catalyst 8.9 Released, Performance Tested | jmke | WebNews | 0 | 18th September 2008 00:02 |
Max Payne 2 Review | jmke | Articles & Howto's | 5 | 25th February 2004 20:48 |
Thread Tools | |
| |