Pentium 4 benchmarking 1 Attachment(s) |
1 Attachment(s) 1ste tests with P4 1400MHz: 2000MHz CPU-Z verified: http://valid.x86-secret.com/show_oc.php?id=442017 Problems I'm running into: - Multiplier is stuck to 12, while 14 is the default value. 12 is battery saving multiplier. - DRAM divider malfunctioning, can't set anything else then 3:4 at this moment which makes me run into maximum DRAM frequency pretty fast. - Board freezes randomly after VGA artifacts More to come the following days... |
time to mount the single stage, mobo should be good for 250+Mhz FSB, reaching up and over 300Mhz if you can handle it |
wish the memory divider would co-op with me for that :s |
Bios flash? |
TCCD ram is maybe an option , slower timings but higher mhz. |
I'm not 100% sure but I think there is something wrong with the board as I'm getting VGA erros all the time. Tested 2 S3 PCI videocards in every PCI slot as we speak. |
For TCCD ram, you need to flash the bios : http://www.xtremesystems.org/forums/...highlight=TCCD |
if u need a other board : contact maximus on 9lives ;) p4c800 he had i think still fully modded from back with dothan :P |
Got this board via him ;) |
All times are GMT +1. The time now is 16:27. |
Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO