It appears you have not yet registered with our community. To register please click here...

 
Go Back [M] > [M] Overclocking Team > General OC-Team Forum
MSI Masters Overclocking Arena 2009 - Qualifiers MSI Masters Overclocking Arena 2009 - Qualifiers
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read


MSI Masters Overclocking Arena 2009 - Qualifiers
Closed Thread
 
Thread Tools
Old 1st June 2009, 22:00   #81
PowerToTheUsers
 
Posts: n/a
Default

Quote:
Originally Posted by leeghoofd View Post
Which Pl is that on Johan ?
As I said before: Performance Level is at the middle of the three options. If the options are standard-turbo-extreme, it's at turbo. But I don't know the name of the setting by heart.
At Standard, the system doesn't boot at 530FSB
Quote:
I would give 1.36NB voltage, MCH reference around 0.74 a shot, works fine on my EP45 UD3P till 580FSB... I have noticed on the Rampage extreme if I can't pass that memtest 7 test, that 3druns would be pretty hard to do... P45 remains a very sensitive chipset regarding volts...

Here's the run we did with Blind for the GOOC qualifiers

[IMG]http://s3.photobucket.com/albums/y90/blind_ripper/?action=view&current=Clipboard02.jpg[/IMG]

I had issues with benching 3D over 5.6Ghz due to heat, maybe that's ya issue too
What heat? The northbridge feels like roomtemperature... And CPU is cooled by vapochill. with evaporator-temp on the display hadly above -40C
I'll try that 1.36Vnb (MCH Core) and 0.74 MCH Ref.
 
Old 1st June 2009, 22:06   #82
[M] Reviewer
 
leeghoofd's Avatar
 
Join Date: Dec 2008
Posts: 3,159
leeghoofd Fully Registeredleeghoofd Fully Registeredleeghoofd Fully Registeredleeghoofd Fully Registeredleeghoofd Fully Registeredleeghoofd Fully Registeredleeghoofd Fully Registeredleeghoofd Fully Registered
Default

Performance level is TR(R)D (not sure anymore, it's the first one you encounter in that section) in the advanced ram section, the setting you are claiming did nothing to me... check with MemSet Johan, in Blind's piccie it's at 10, mostly I boot with 10 and then lower via MemSet and then run the PI...

My Nb without active fan is pretty warm, indicating good conductivity and that's even at 333FSB with just 1.2NB volts. Plz remove the heatpipe and redo the TIM

Last edited by leeghoofd : 1st June 2009 at 22:09.
leeghoofd is offline  
Old 1st June 2009, 22:44   #83
Madshrimp
 
jmke's Avatar
 
Join Date: May 2002
Location: 7090/Belgium
Posts: 78,739
jmke has disabled reputation
Default

first post updated with current standings
__________________
jmke is offline  
Old 1st June 2009, 22:47   #84
PowerToTheUsers
 
Posts: n/a
Default

Quote:
Originally Posted by leeghoofd View Post
Performance level is TR(R)D (not sure anymore, it's the first one you encounter in that section) in the advanced ram section, the setting you are claiming did nothing to me... check with MemSet Johan, in Blind's piccie it's at 10, mostly I boot with 10 and then lower via MemSet and then run the PI...
Higher PL = Higher FSB possible?

Quote:
My Nb without active fan is pretty warm, indicating good conductivity and that's even at 333FSB with just 1.2NB volts. Plz remove the heatpipe and redo the TIM
I felt at the base below the watercooling part. 3x120mm fans around it do their job

Quote:
Originally Posted by jmke View Post
first post updated with current standings
Only two participants?

Last edited by PowerToTheUsers : 1st June 2009 at 22:49.
 
Old 1st June 2009, 23:27   #85
PowerToTheUsers
 
Posts: n/a
Default

Quote:
Originally Posted by leeghoofd View Post
Which Pl is that on Johan ?

I would give 1.36NB voltage, MCH reference around 0.74 a shot, works fine on my EP45 UD3P till 580FSB... I have noticed on the Rampage extreme if I can't pass that memtest 7 test, that 3druns would be pretty hard to do... P45 remains a very sensitive chipset regarding volts...

Here's the run we did with Blind for the GOOC qualifiers

[IMG]http://s3.photobucket.com/albums/y90/blind_ripper/?action=view&current=Clipboard02.jpg[/IMG]

I had issues with benching 3D over 5.6Ghz due to heat, maybe that's ya issue too
Current memset-settings, used from 530 to 570MHz: http://www.johanlemaire.be/OC/E8600/memset.JPG
As the memory clocks all the way up to 570MHz with those settings, I don't think there need to be much changes.

I think I lost the right CPU/PCIe clock drive and CPU/MCH Clock skew. I couldn't run 545MHz anymore a few seconds ago.
 
Old 2nd June 2009, 12:08   #86
Madshrimp
 
jmke's Avatar
 
Join Date: May 2002
Location: 7090/Belgium
Posts: 78,739
jmke has disabled reputation
Default

Quote:
Originally Posted by PowerToTheUsers View Post
Only two participants?
50% chance to win
you only need to beat MM's scores,
__________________
jmke is offline  
Old 2nd June 2009, 12:36   #87
[M] Reviewer
 
leeghoofd's Avatar
 
Join Date: Dec 2008
Posts: 3,159
leeghoofd Fully Registeredleeghoofd Fully Registeredleeghoofd Fully Registeredleeghoofd Fully Registeredleeghoofd Fully Registeredleeghoofd Fully Registeredleeghoofd Fully Registeredleeghoofd Fully Registered
Default

Try to bench at 5.55 3D Johan you can breach 101K for sure (try maybe 11 PL). Try to give the CPU more FSB term voltage for higher speeds... Seems yours is volt hungry. Hope you can make it dude ! And in the worst case scenario hopefully you can join the Massman at the contest. Now I know why he kept my board and the Blades lol....
leeghoofd is offline  
Old 2nd June 2009, 12:37   #88
Madshrimp
 
jmke's Avatar
 
Join Date: May 2002
Location: 7090/Belgium
Posts: 78,739
jmke has disabled reputation
Default

yup, at the end of the day we can send two people to Tweakers.net to beat them all and hope for qualification
__________________
jmke is offline  
Old 2nd June 2009, 12:49   #89
[M] Reviewer
 
leeghoofd's Avatar
 
Join Date: Dec 2008
Posts: 3,159
leeghoofd Fully Registeredleeghoofd Fully Registeredleeghoofd Fully Registeredleeghoofd Fully Registeredleeghoofd Fully Registeredleeghoofd Fully Registeredleeghoofd Fully Registeredleeghoofd Fully Registered
Default

Teamname : Power To The User Massman
leeghoofd is offline  
Old 6th June 2009, 12:58   #90
[M] Reviewer
 
Join Date: Nov 2004
Location: Waregem
Posts: 6,465
Massman Freshly Registered
Default

Too bad I can't submit the 32M of the GOOC finals
__________________
Massman is offline  
Closed Thread


Similar Threads
Thread Thread Starter Forum Replies Last Post
[M] MSI Master Overclocking Arena 2010 Benelux Final jmke WebNews 1 31st May 2010 18:16
MSI Master Overclocking Arena 2009 Grand Final in Beijing - Video Coverage jmke WebNews 0 6th September 2009 09:45
MSI Master Overclocking Arena 2008 Promo Video jmke WebNews 2 14th June 2009 16:37
MSI US Announces 2009 Product Lineup jmke WebNews 0 6th January 2009 09:17
MSI Master Overclocking Arena 2008 video jmke WebNews 0 12th November 2008 21:37
MSI Master Overclocking Arena 2008 Won by Indonesia jmke WebNews 0 10th November 2008 18:48
The TOP 3 MSI EU Overclocking Challenge battles in the Master Overclocking Arena 2008 jmke WebNews 4 7th November 2008 14:23
MSI European Overclocking Challenge 2008 jmke WebNews 1 6th July 2008 10:14
MSI Overclocking Contest : Info & Howto Join jmke General OC-Team Forum 1 14th June 2008 20:44

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


All times are GMT +1. The time now is 02:32.


Powered by vBulletin® - Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO