Madshrimps Forum Madness

Madshrimps Forum Madness (http://www.madshrimps.be/vbulletin/)
-   General OC-Team Forum (http://www.madshrimps.be/vbulletin/f41/)
-   -   Attempt to get top5 hwbot CpuZ (http://www.madshrimps.be/vbulletin/f41/attempt-get-top5-hwbot-cpuz-64606/)

Chiller 19th June 2009 22:24

Attempt to get top5 hwbot CpuZ
 
about a few weeks i'm going to attempt to get to top5 with CpuZ on hwbot,
Blind Ripper has a very nive score with Second place Global, good job Blindy !!!

I'm going to play with following hardware :

2x Celeron 347 Cedar Mills (does 7.1Mhz with NO Vmod)
1x P4 D 955 Extreme Edition (does 5.3Ghz on water)

on a Asus Commando with Vmod self done.
I normally use Crusial Ballistic tracer pc2-6400 MicronD9
and OCZ Flex pc2-8500 MicronD9.

Is this good memory?

Anybody have some tips or anything else?
Only just need a LNē container for cpu...... Massy ???




Also i'm have now a E8600 Q822A435 batch cpu for Superpi1M, and leeghoofd is coming to deliver a REX for this run.

Hope to get a lot of Global points for my profile and hwboints for the team.
And also anybody have time and the motivation to join this OC Demo in a new pc-shop in leopoldsburg for this OC weekend in pc-shop ?

skulstation 20th June 2009 05:29

veel geluk op deze demo. jamer genoeg ligd leopolsburg voor mij iets tever,
heb namelijk zelf geen auto maar gebruik een camionet van hat werk en dat is per km te betaale in het weekend .
mvg

leeghoofd 20th June 2009 08:44

I'll bring my Gskills PC8000HZ too Johan normally they do 1280mhz 5-5-5-15 2.35Vdimm.

Just don't smoke the hardware plz !!

Massman 20th June 2009 09:00

Quote:

Originally Posted by croiman (Post 240104)
on a Asus Commando with Vmod self done.
I normally use Crusial Ballistic tracer pc2-6400 MicronD9
and OCZ Flex pc2-8500 MicronD9.

Is this good memory?

For Commando, make sure you figure out a way to remove the OVP. With OVP enabled, it'll be difficult to go past 1.92v.

Memory is good; you might want to use Albrecht's Gskill if needed. Just use the memory that can do 650MHz and you're good for the E8600

Quote:

Originally Posted by croiman (Post 240104)
Anybody have some tips or anything else?
Only just need a LNē container for cpu...... Massy ???

When you need it exactly? Next week I'm on vacation, so from the moment you pay I can send it to you.

Chiller 20th June 2009 09:20

Quote:

Originally Posted by leeghoofd (Post 240115)
I'll bring my Gskills PC8000HZ too Johan normally they do 1280mhz 5-5-5-15 2.35Vdimm.

Just don't smoke the hardware plz !!

The only thing i smoke are sigarets......:D

Quote:

Originally Posted by Massman (Post 240116)
For Commando, make sure you figure out a way to remove the OVP. With OVP enabled, it'll be difficult to go past 1.92v.

Memory is good; you might want to use Albrecht's Gskill if needed. Just use the memory that can do 650MHz and you're good for the E8600
When you need it exactly? Next week I'm on vacation, so from the moment you pay I can send it to you.

Commando OVP ?? is the Vmod not good enough then ?
And how to disable OVP on commando then?
Any HOW TO anywhere ?

so 650Mhz memory is good for superpi1m then???

For lnē tube, i have a corsair psu for sale when i receive my cooler master psu, then i can pay it.
just bouhgt al this hardware for hwboints.
When done with benching this hardware also leaves the house.
Can we make a deal maybe?

Massman 20th June 2009 09:49

Quote:

Originally Posted by croiman (Post 240118)
Commando OVP ?? is the Vmod not good enough then ?
And how to disable OVP on commando then?
Any HOW TO anywhere ?

There's some information on XS (http://www.xtremesystems.org/forums/...d.php?t=220389 - same IC like on Commando), but not sure if that's correct.

Vmod is enough to go upto 1.92v, but for high validations, you'll probably need more. Keep in mind, that 352 of me is a real golden cpu.

Quote:

Originally Posted by croiman (Post 240118)
so 650Mhz memory is good for superpi1m then???

Oops, I forgot you were going to use the REX. Yeah, no ... forget about the memory than. With the 347's, you're not gonna be able to run 1:2, so the memory speed will be low anyway.

Quote:

Originally Posted by croiman (Post 240118)
For lnē tube, i have a corsair psu for sale when i receive my cooler master psu, then i can pay it.
just bouhgt al this hardware for hwboints.
When done with benching this hardware also leaves the house.
Can we make a deal maybe?

Deal as in?

Chiller 20th June 2009 10:02

the OVP mod on the asus P5 mobo doesn't work on commando i read,
commando is toast lol.
But on a german site i found something interesting : http://www.awardfabrik.de/forum/showthread.php?p=281229

i'm going to try this one.
first i run everything without OVP, after gettings first CpuZ verifications, then i will use or try the OVP and to get higher.
But i will make it already on the commando, but just don't use it, or test it first with a cpu that doesn'tmatter.

352 golden cpu ? interesting........

Massman 20th June 2009 10:10

That one should work indeed ... let's hope!

Yeah, really golden. Next time this chip gets tested without OVP it'll go over 8.2G for sure ... easy!

Chiller 20th June 2009 10:23

I'm going to do a OVP mod for +2v Vcore.
I lett you know how it works out on benching day.
If my OVP works, you can use my mobo for your cpu if you like.

Can i use your tube for this bench session after few weeks Massy ?
We will work something out together financial.

Massman 20th June 2009 10:27

Sure, do a suggestion and I'll let you know :super:


All times are GMT +1. The time now is 03:50.

Powered by vBulletin® - Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO