![]() |
| | Thread Tools |
| | #21 |
| [M] Reviewer Join Date: Nov 2004 Location: Waregem
Posts: 6,465
![]() | Area3 is Vmem, by the way ![]() |
| |
| | #22 |
| [M] Reviewer Join Date: Dec 2008
Posts: 3,024
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | Go go for them golden cups !!! |
| |
| | #23 |
| [M] Reviewer Join Date: Nov 2004
Posts: 4,117
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | What BIOS voltage do you increase to get higher VGA clocks? |
| |
| | #24 |
| [M] Reviewer Join Date: Nov 2004 Location: Waregem
Posts: 6,465
![]() | Increasing the voltage of the NB core / Pci-e (which seems to be link, at least according to the bios). Nu, Vigp != Vnb. 1.6v in de bios, is -wellicht- ongeveer 1.35v Vigp (andere mensen kunnen de Vigp wél appart instellen en kunnen 1.1GHz core doen op 1.38v. |
| |
| | #25 |
| [M] Reviewer Join Date: Nov 2004
Posts: 4,117
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | And there are probable no datasheet available? |
| |
| | #26 |
| [M] Reviewer Join Date: Nov 2004 Location: Waregem
Posts: 6,465
![]() | |
| |
| | #27 |
| [M] Reviewer Join Date: Nov 2004
Posts: 4,117
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | What volts do you read at the MOSFET legs in area 2 and 3? |
| |
| | #28 |
| [M] Reviewer Join Date: Nov 2004 Location: Waregem
Posts: 6,465
![]() | |
| |
| | #29 |
| [M] Reviewer Join Date: Nov 2004
Posts: 4,117
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | So that's for onboard mem correct? DDR2? What do you read on them small mosfet and coils. Should be Vdimm around that area. Set it high enough in BIOS so you're not getting confused with onboard mem voltage. |
| |
| | #30 |
| [M] Reviewer Join Date: Nov 2004 Location: Waregem
Posts: 6,465
![]() | Onboard memory is DDR3 and was set at 1.5v; increasing it to 1.7v doesn't change anything on the mosfet voltages Can't get to the back of the motherboard since the northbridge cooler isn't fixed to the board. Two of the smaller mosfets read 2.12v (bios: vdimm set at 2.2v) and two measure a bit above 5v. |
| |
![]() |
| Thread Tools | |
| |