Gamer's 7300GT worklog - Page 13

Gamer · 15th July 2007, 09:47

You think ?

Yes, 1.7vcore.
Temps are -99° in bios, don't know what the real one is

Must check mounting, redone it a few times, and always the overclock goes higher.
A capasitor must be in the way of perfect mounting.

easypanic · 15th July 2007, 09:50

Quote:

Originally Posted by Gamer

You think ?

I was expecting a closer shot of your mounting (and perhaps a shot of the two units, I see only a hose above your cpu

)

Gamer · 15th July 2007, 09:54

your wish will be granted

easypanic · 15th July 2007, 09:56

Simplest mounting ever

.

Just tighten the thing real hard

.

Gamer · 15th July 2007, 09:59

Screws are at maximum strengh, must be something else.

Massman · 15th July 2007, 11:30

Be careful when you tighten the screws, you're mobo may bend, which can result in lower clocks (been there ...).

Just mount the evap on the cpu and PRESS the mounting as hard as you can onto the cpu. Then tighten the screws. This way, you'll have perfect contact and the board won't bend. You'll notice that the screws can be tightened a little bit more, but leave it the way it is.

By the way, your results made us jump to place 15 again

jmke · 15th July 2007, 11:44

nice setup

what temps do you get on the GPU?

15th July 2007, 12:08

LOL why using multi 8,
use multi 10

actually I DID massman

blind_ripper · 16th July 2007, 12:01

thats a strange mount for a vga

gamer make sure ur O ring dont come of , my stainlessteel on jumped of en killed the card

.
btw make a good hold down

its easy as hell

Attachment 975
the card benched for a hole week and the it just died

jmke · 16th July 2007, 13:10

I don't think hardware in your hands "just dies"

15th July 2007, 09:47	#121
Gamer [M] Reviewer Join Date: May 2002 Posts: 4,582	You think ? Yes, 1.7vcore. Temps are -99° in bios, don't know what the real one is Must check mounting, redone it a few times, and always the overclock goes higher. A capasitor must be in the way of perfect mounting. __________________

15th July 2007, 09:54	#123
Gamer [M] Reviewer Join Date: May 2002 Posts: 4,582	your wish will be granted Attached Thumbnails __________________ Last edited by Gamer : 15th July 2007 at 09:58.

15th July 2007, 09:59	#125
Gamer [M] Reviewer Join Date: May 2002 Posts: 4,582	Screws are at maximum strengh, must be something else. __________________

15th July 2007, 11:30	#126
Massman [M] Reviewer Join Date: Nov 2004 Location: Waregem Posts: 6,465	Be careful when you tighten the screws, you're mobo may bend, which can result in lower clocks (been there ...). Just mount the evap on the cpu and PRESS the mounting as hard as you can onto the cpu. Then tighten the screws. This way, you'll have perfect contact and the board won't bend. You'll notice that the screws can be tightened a little bit more, but leave it the way it is. By the way, your results made us jump to place 15 again Last edited by Massman : 15th July 2007 at 11:43.

15th July 2007, 11:44	#127
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 78,423	nice setup what temps do you get on the GPU? __________________

15th July 2007, 09:56	#124
easypanic [M] Reviewer Join Date: Mar 2003 Posts: 1,823	Simplest mounting ever . Just tighten the thing real hard .

15th July 2007, 12:08	#128
Pardons Posts: n/a	LOL why using multi 8, use multi 10 actually I DID massman Last edited by Pardons : 15th July 2007 at 15:08.

16th July 2007, 12:01	#129
blind_ripper OCTB Crew Join Date: Apr 2005 Posts: 1,338	thats a strange mount for a vga gamer make sure ur O ring dont come of , my stainlessteel on jumped of en killed the card . btw make a good hold down its easy as hell Attachment 975 the card benched for a hole week and the it just died __________________ Last edited by blind_ripper : 25th July 2008 at 20:44.

16th July 2007, 13:10	#130
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 78,423	I don't think hardware in your hands "just dies" __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cranox 7300GT worklog	Cranox	Project Worklogs & Benchmarks	55	31st August 2007 20:52
Richie's 7300GT worklog	RichBa5tard	Project Worklogs & Benchmarks	5	31st August 2007 12:42
Geoffrey's 7300GT worklog	geoffrey	Project Worklogs & Benchmarks	81	30th August 2007 23:14
Duploxxx's 7300GT Worklog	duploxxx	Project Worklogs & Benchmarks	22	16th August 2007 08:05
Blind's 7300GT worklog	blind_ripper	Project Worklogs & Benchmarks	81	11th August 2007 20:18
Massman's 7300GT worklog	Massman	Project Worklogs & Benchmarks	72	27th July 2007 09:41
Piotke's 7300GT worklog	piotke	Project Worklogs & Benchmarks	14	24th July 2007 12:43
cherouke's 7300GT worklog	cherouke	Project Worklogs & Benchmarks	18	16th July 2007 22:47
Troman's 7300GT worklog	Pardons	Project Worklogs & Benchmarks	79	9th July 2007 15:38
Teemto's 7300GT worklog	Teemto	Project Worklogs & Benchmarks	41	1st July 2007 20:42