Arctic Silver 5 - Page 3

jmke · 30th November 2003, 13:07

AS5 spreading out using bankcard, room/environment temp calibrated at 30°C, system was shut down twice every day to let the paste "cool" down.

Load Averages:
day1: 36.7°C -- Max temp: 38°C
day2: 36.4°C -- Max temp: 37°C
day3: 36°C -- Max temp: 37°C

Testing now with Arctic's methods, blob of AS5 in the middle and letting the heatsink spread it out.

The Senile Doctor · 30th November 2003, 17:04

interesting...!

jmke · 1st December 2003, 21:17

test over 24 hours, full stressed, 2 shutdowns of 10min, temps are no different from the other method at this time. and the margin of error is within 0.5°C.

On to the CoolerMaster Premium, that stuff is hard to spread out! ended up using the same "dot in the middle" method, much easier and same effect!

jmke · 3rd December 2003, 19:40

CM Premium:
DAY1 36.9°C -- Max temp: 38°C
DAY2 36.4°C -- Max temp: 37°C
DAY3 36.1°C -- Max temp: 37°C

must be said though, that this is a load average, with fluctuations, I will include max reached temps for each day also,

biCker · 3rd December 2003, 21:20

Quote:

Originally posted by jmke
On to the CoolerMaster Premium, that stuff is hard to spread out! ended up using the same "dot in the middle" method, much easier and same effect!

I spilled a full (!!) tube trying to apply that stuff and ended up shaking and shivering. After the shaking stopped I used the good ol' asIII...

jmke · 3rd December 2003, 21:40

use the blob in the middle method, fast & effective, as you can see by the results, it equals AS5 performance

jmke · 4th December 2003, 22:22

AS5:
day1: 36.7°C -- Max temp: 38°C
day2: 36.4°C -- Max temp: 37°C
day3: 36°C -- Max temp: 37°C

CM Premium:
DAY1 36.9°C -- Max temp: 38°C
DAY2 36.4°C -- Max temp: 37°C
DAY3 36.1°C -- Max temp: 37°C

The Senile Doctor · 5th December 2003, 05:46

how big should that blob be?

they're equal if we see the results...

jmke · 5th December 2003, 09:11

hard to put in words, so I have taken pictures of the blob, before & after, you can see it spread out very neatly all over the core. online soon

btw AS3 is performing far from bad either, hovering around 6-7°C over environment temperature.

jmke · 6th December 2003, 11:13

AS3:

DAY1: 36.8°C -- Max temp: 38°C

30th November 2003, 13:07	#21
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	AS5 spreading out using bankcard, room/environment temp calibrated at 30°C, system was shut down twice every day to let the paste "cool" down. Load Averages: day1: 36.7°C -- Max temp: 38°C day2: 36.4°C -- Max temp: 37°C day3: 36°C -- Max temp: 37°C Testing now with Arctic's methods, blob of AS5 in the middle and letting the heatsink spread it out. __________________

30th November 2003, 17:04	#22
The Senile Doctor Member Join Date: May 2002 Location: wherever the doom is Posts: 3,171	interesting...! __________________ OC-2-the-death Where the Reverend is doing his Magick, all mortals be silent Doom over the world

1st December 2003, 21:17	#23
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	test over 24 hours, full stressed, 2 shutdowns of 10min, temps are no different from the other method at this time. and the margin of error is within 0.5°C. On to the CoolerMaster Premium, that stuff is hard to spread out! ended up using the same "dot in the middle" method, much easier and same effect! __________________

3rd December 2003, 19:40	#24
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	CM Premium: DAY1 36.9°C -- Max temp: 38°C DAY2 36.4°C -- Max temp: 37°C DAY3 36.1°C -- Max temp: 37°C must be said though, that this is a load average, with fluctuations, I will include max reached temps for each day also, __________________

3rd December 2003, 21:40	#26
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	use the blob in the middle method, fast & effective, as you can see by the results, it equals AS5 performance __________________

4th December 2003, 22:22	#27
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	AS5: day1: 36.7°C -- Max temp: 38°C day2: 36.4°C -- Max temp: 37°C day3: 36°C -- Max temp: 37°C CM Premium: DAY1 36.9°C -- Max temp: 38°C DAY2 36.4°C -- Max temp: 37°C DAY3 36.1°C -- Max temp: 37°C __________________

5th December 2003, 05:46	#28
The Senile Doctor Member Join Date: May 2002 Location: wherever the doom is Posts: 3,171	how big should that blob be? they're equal if we see the results... __________________ OC-2-the-death Where the Reverend is doing his Magick, all mortals be silent Doom over the world

5th December 2003, 09:11	#29
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	hard to put in words, so I have taken pictures of the blob, before & after, you can see it spread out very neatly all over the core. online soon btw AS3 is performing far from bad either, hovering around 6-7°C over environment temperature. __________________

6th December 2003, 11:13	#30
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	AS3: DAY1: 36.8°C -- Max temp: 38°C __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Arctic Silver "Arctic Clean"	jmke	WebNews	0	30th March 2006 18:44
Arctic Silver Products	Sidney	WebNews	0	8th July 2005 14:55
Arctic Silver ArctiClean	Sidney	WebNews	0	27th May 2005 06:47
Arctic Silver ArctiClean Review	Da_BoKa	WebNews	0	25th April 2005 10:12
Arctic Silver ArctiClean	Sidney	WebNews	0	18th April 2005 04:21
Arctic Silver 5 Thermal Compound	Sidney	WebNews	0	30th January 2005 16:56
Arctic Silver ArctiClean Review	jmke	Articles & Howto's	25	22nd January 2005 23:05
Arctic Silver and Nanotherm kiss and make up: Cooperation announced!	jmke	WebNews	0	17th August 2004 22:21
problem! spilled arctic silver :(	quacktastic	Hardware/Software Problems, Bugs	2	1st July 2004 01:42
Arctic Silver 5 Extensive Review	jmke	Articles & Howto's	13	29th March 2004 06:08