jmke

Last I remember from Zalman, I was testing the CNPS10X coolers, of which there were four versions in total - two of which I got to look at personally. There was the Performa and the Extreme, both of which were typical tower based designs with a top cover and other tricks specific to the series. The cooler we are about to see takes on some of the attributes of these coolers, but harks back to the CNPS7 series of coolers for its outer appearance. You might even say both got their concept for the CNPS5, but we aren't splitting hairs here and it looks much more like the 7 series."

The concept with the CNPS7X was that it used the flat square front of a tower design, but the back was trimmed into a wedge shape. Now, back with the CNPS7X, the fins went from the fan edge to the tip of the wedge in the back - for this generation there has been a major change here. Another change is the amount of heat pipes that ran through that cooler. It used three 6mm heat pipes and a really funky mounting system. Both of those have been changed as well. While the cooler we are about to look at has a cover, or hat let's say, it keeps a very similar outer appearance to the CNPS7X, but let's hope along with the redesign we have also improved upon the performance of the CNPS10X series. I mean to take on the new higher number, it only makes sense that it should perform better, right?

http://www.tweaktown.com/reviews/423...iew/index.html

__________________