Voltage Mod Radeon X800 Pro with Pencil @ VR-Zone

jmke · 19th May 2004, 10:37

The card isn't even in the shop yet here.. but when you get your hands on one, you can directly turn up its speed with the help of a little more voltage through the core!

Quote:

Locate the resistor as shown above and start to pencil it slowly, a few strokes should be sufficient to increase the VGPU from 1.31v to 1.4v. I have tried higher voltages but i have found that any voltage higher than 1.45V seems to be a little too much and the card will start artifacting during benching. Therefore i have left the VGPU at 1.4v which is pretty sufficient for air cooling.

http://www.vr-zone.com/?i=817&s=1

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ATI Radeon X800 Voltage Modding Guide Rev. 2.0	jmke	WebNews	0	7th January 2005 23:12
ATI Radeon X800 Voltage Modding Guide Posted!	Sidney	WebNews	0	30th December 2004 16:29
The Radeon 9800 Pro To Radeon 9800XT Mod Guide Rev. 6.0 Posted!	Sidney	WebNews	0	26th December 2004 15:54
Radeon X800 Pro - Doom 3 performance investigated	jmke	WebNews	0	14th August 2004 13:43
Powercolor Radeon X800 Pro	jmke	WebNews	0	16th July 2004 19:02
Asus AX800 Pro (Radeon X800 Pro)	jmke	WebNews	1	1st July 2004 20:56
Sapphire’s Radeon X800 Pro 256MB @ GamePC	jmke	WebNews	2	17th May 2004 22:28
ATI RADEON X800 PRO Makes Retail Debut in Japan, USA	jmke	WebNews	0	12th May 2004 14:50
VisionTek Launches ATI RADEON X800 PRO	jmke	WebNews	0	6th May 2004 14:14