RAID Performance w/ four Patriot Warp 2 SSDs - Up to 660MB/s

jmke · 19th January 2009, 17:12

We are back on the subject of Solid State Disk drives again and this time you're in for a real treat! This will be an adventure into extreme high-end storage with massive amounts of performance on tap. We managed to convince our contacts over at Patriot Memory to send us on over a grand total of four of their impressive Warp 2 SSDs.

What we are aiming to achieve in this article, besides showing off incredibly powerful RAID 0 performance, is to give consumers an idea of the level of read and write performance they can expect when running SSDs in various RAID levels. We covered them all - count them... 0, 1, 5, 6, 10 and single drive for good measure. We even tested with write caching enabled in RAID 0."

http://www.tweaktown.com/articles/17...b_s/index.html

19th January 2009, 23:55

Again, only HD Tune tests... not good. Some ATTO or other tests to check on Jmciron controller's impact on performance would have been good.

thorgal · 20th January 2009, 13:48

Quote:

Originally Posted by Kougar

Again, only HD Tune tests... not good. Some ATTO or other tests to check on Jmciron controller's impact on performance would have been good.

Agreed, but I wouldn't worry too much about the ssd controller, as it's (lack of) performance is completely "flattened" by the onboard cache from the RAID controller.

20th January 2009, 20:47

Are you sure of that? The problem was at the firmware/controller level regardless of cache on the SSD. I just am not sure that a RAID controller could fully or mostly mitigate it.

Was some interesting tidbits on the issue in the W7 performance metric article. http://blogs.msdn.com/e7/archive/200...nce-index.aspx

19th January 2009, 17:12	#1
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	RAID Performance w/ four Patriot Warp 2 SSDs - Up to 660MB/s We are back on the subject of Solid State Disk drives again and this time you're in for a real treat! This will be an adventure into extreme high-end storage with massive amounts of performance on tap. We managed to convince our contacts over at Patriot Memory to send us on over a grand total of four of their impressive Warp 2 SSDs. What we are aiming to achieve in this article, besides showing off incredibly powerful RAID 0 performance, is to give consumers an idea of the level of read and write performance they can expect when running SSDs in various RAID levels. We covered them all - count them... 0, 1, 5, 6, 10 and single drive for good measure. We even tested with write caching enabled in RAID 0." http://www.tweaktown.com/articles/17...b_s/index.html __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Four Kingston SSDNow E (Intel X25-E) SSDs in RAID 0 - Win 7	jmke	WebNews	0	6th August 2009 13:22
Patriot Announces DDR3 Registered ECC Modules for High Performance Servers	jmke	WebNews	0	15th May 2009 09:07
Patriot Warp V3 256GB 2.5-inch Solid State Disk	jmke	WebNews	0	23rd March 2009 12:33
A look at four X25-E Extreme SSDs in RAID	jmke	WebNews	1	28th January 2009 03:59
Patriot Warp 32GB 2.5" Solid State Drive review	jmke	WebNews	0	12th December 2008 10:55
Patriot Warp V2 128GB 2.5 Solid State Drive	jmke	WebNews	0	29th October 2008 11:49
Intel X25-M SSDs in RAID 0 Tested	jmke	WebNews	0	18th October 2008 16:16
Raid and Gaming Performance	jmke	WebNews	0	1st April 2008 19:52
Chipset Serial ATA and RAID performance compared	jmke	WebNews	0	8th December 2005 11:11
Chipset Serial ATA and RAID performance comparison @ Tech-Report	jmke	WebNews	0	27th May 2004 16:48

19th January 2009, 23:55	#2
Kougar Posts: n/a	Again, only HD Tune tests... not good. Some ATTO or other tests to check on Jmciron controller's impact on performance would have been good.

20th January 2009, 20:47	#4
Kougar Posts: n/a	Are you sure of that? The problem was at the firmware/controller level regardless of cache on the SSD. I just am not sure that a RAID controller could fully or mostly mitigate it. Was some interesting tidbits on the issue in the W7 performance metric article. http://blogs.msdn.com/e7/archive/200...nce-index.aspx