| Thread Tools |
24th September 2005, 18:26 | #1 |
Member Join Date: Mar 2004
Posts: 15,738
| Project KOS-MOS The first step was to key the metal work with a coarse 450 grit to give the primer something to bite into. After the first coat, I let it cure over night before attacking the primer with some 600 grit - the idea was to smooth out the primer giving a nice base for the final paint to sit on. I only sanded it very gently as to not take it back to bare metal; when I exposed the metal I stopped and reprimed it, then sanded again. This carried on until I had a coat of smooth primer that didnt have any exposed metal. I used nine layers in total for the front bezel switching to finer paper when I needed. Link http://www.bit-tech.net/modding/2005...kos_mos/1.html
__________________ lazyman Opteron 165 (2) @2.85 1.42 vcore AMD Stock HSF + Chill Vent II |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Super Talent Unleashes DDR3-2000 Project X Kit | jmke | WebNews | 0 | 11th April 2008 10:35 |
Why Intel bought Project Offset and the Offset Engine | jmke | WebNews | 1 | 27th February 2008 23:15 |
Super Talent Unveils Project X DDR3 Kits | jmke | WebNews | 0 | 12th September 2007 10:07 |
Project: Mac mini Cube | jmke | WebNews | 0 | 3rd November 2006 09:34 |
The Mini-ITX Project Revisited | jmke | WebNews | 0 | 24th October 2005 22:30 |
Chipmakers, N.Y. state seed lithography project | Sidney | WebNews | 0 | 19th July 2005 22:11 |
DOOM 3: Project Mars City Mod | jmke | WebNews | 0 | 11th July 2005 19:30 |
Project LX Benchmark Press Release | jmke | WebNews | 0 | 20th February 2005 17:04 |
Featured PimpRig // Project: Vash | Sidney | WebNews | 7 | 9th January 2005 23:08 |
Thread Tools | |
| |