OCZ Platinum EL PC-4800 Elite Dual Channel DDR

Sidney · 16th August 2005, 07:48

To test the limits of each kit, I first lowered the multiplier from 9 to 8, which will prevent the processor from maxing out and let us fully test the modules. I set the HT multiplier to 3x, and used the rated timings of 2.5-4-4-10 2T. To verify stability, I ran each setting for over an hour in Memtest86 (4 full passes). If the settings used passed this test, I then proceeded to run Prime95 to check stability in Windows. If a particular setting failed in Memtest86, I would reboot and bump up the memory voltage in .1 increments in hopes of attaining stability.

Direct Link: http://www.ocia.net/reviews/4800elite/page1.shtml

16th August 2005, 14:13

2,5-4-4-10 2T ? ouch, that hurts!

jmke · 16th August 2005, 15:06

find me DDR600/PC4800 with lower rated timings

(with link please, company specs, no forum OC)

17th August 2005, 06:57

sure , it's rated 2,5-4-4-10 2T
You're not impressing enthousiasts with such timings. To which these modules are aimed , right?
I'm sure the memory can do much better ! the reviewer otoh...

jmke · 17th August 2005, 07:47

please find other PC4800 memory with better timings!

Sidney · 17th August 2005, 07:52

Please find a Venice 3800+ that runs at 300Mhz!

17th August 2005, 10:18

find a reviewer with skills

What bios is he using on the DFI nforce4 ?

I'll shut up now

jmke · 17th August 2005, 11:25

Quote:

Originally posted by Jaco
find a reviewer with skills

finding a reviewer with skill with not change the specs of the ram...

16th August 2005, 07:48	#1
Sidney Member Join Date: Mar 2004 Posts: 15,738	OCZ Platinum EL PC-4800 Elite Dual Channel DDR To test the limits of each kit, I first lowered the multiplier from 9 to 8, which will prevent the processor from maxing out and let us fully test the modules. I set the HT multiplier to 3x, and used the rated timings of 2.5-4-4-10 2T. To verify stability, I ran each setting for over an hour in Memtest86 (4 full passes). If the settings used passed this test, I then proceeded to run Prime95 to check stability in Windows. If a particular setting failed in Memtest86, I would reboot and bump up the memory voltage in .1 increments in hopes of attaining stability. Direct Link: http://www.ocia.net/reviews/4800elite/page1.shtml __________________ lazyman Opteron 165 (2) @2.85 1.42 vcore AMD Stock HSF + Chill Vent II

16th August 2005, 15:06	#3
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	find me DDR600/PC4800 with lower rated timings (with link please, company specs, no forum OC) __________________

17th August 2005, 07:47	#5
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	please find other PC4800 memory with better timings! __________________

17th August 2005, 07:52	#6
Sidney Member Join Date: Mar 2004 Posts: 15,738	Please find a Venice 3800+ that runs at 300Mhz! __________________ lazyman Opteron 165 (2) @2.85 1.42 vcore AMD Stock HSF + Chill Vent II

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OCZ EB DDR PC-3700 2GB Platinum XTC Dual Channel Kit	jmke	WebNews	0	18th June 2006 10:09
OCZ EL DDR PC-3200 2GB Dual Channel Platinum XTC	jmke	WebNews	0	24th April 2006 10:26
OCZ EL DDR PC-3200 Dual Channel Platinum Rev 2	Sidney	WebNews	0	29th December 2005 13:08
OCZ EB DDR PC-4000 2GB Platinum Edition Dual Channel Memory	Sidney	WebNews	0	30th October 2005 15:24
OCZ EB DDR PC-4000 2x1024MB Platinum Edition Dual Channel Kit	Sidney	WebNews	0	13th October 2005 20:16
OCZ Technology Platinum Edition EL PC-4800 Dual Channel DDR	Sidney	WebNews	0	24th May 2005 18:18
OCZ EL DDR PC-5000 Dual Channel Platinum DFI nF4 Special Memory	Sidney	WebNews	0	14th May 2005 05:38
OCZ EL DDR PC-4200 Dual Channel Platinum	jmke	WebNews	0	24th November 2004 14:09
OCZ EL DDR PC-4200 Dual Channel Platinum Review	Da_BoKa	WebNews	0	23rd November 2004 12:44
OCZ EL DDR PC-3700 / 466mhz / Gold Edition / Dual Channel / Revision 2	jmke	Articles & Howto's	7	26th December 2003 17:56

16th August 2005, 14:13	#2
Jaco Posts: n/a	2,5-4-4-10 2T ? ouch, that hurts!

17th August 2005, 06:57	#4
Jaco Posts: n/a	sure , it's rated 2,5-4-4-10 2T You're not impressing enthousiasts with such timings. To which these modules are aimed , right? I'm sure the memory can do much better ! the reviewer otoh...

17th August 2005, 10:18	#7
Jaco Posts: n/a	find a reviewer with skills What bios is he using on the DFI nforce4 ? I'll shut up now