Intel Core i7 920 D0 Stepping Overclocked to 4.6Ghz with Thermalright Ultra-120

jmke · 18th April 2009, 11:05

It seems that the new stepping for the Intel Core i7 series will be a good one for overclockers; on air this D0 sample hit 4.6Ghz (up from 2.66Ghz at default) and the system is stable enough to run 3DMark06, far from bad! Considering that our guys in Prague yesterday were running Core i7 under LN2 and reaching 4.9~5Ghz 3D stable.

Motherboard used was a DFI DK X58 T3eH6 and OCZ Reaper DDR3-1866 6GB; you can see the full screengrabs at the source

--

Of course there are C0 stepping CPUs which do 4.6-4.7Ghz too on air cooling, but not all of them are able to; so far D0 reports are all very similar to this finding.

if you check the Core i7 920 ranking at HWBot here, you'll notice that the 99% of those with higher than 4.5ghz results are using H20 or better cooling

19th April 2009, 13:24

Really makes me wonder what the Core i7 950 and 975 can do...

Core i7 950 has a 23x multiplier over the 920's 20x. That's enough for 5Ghz at the same 220Mhz QPI link. Or 5.23Ghz with Turbo mode, as the screenie above is using Turbo Mode.

18th April 2009, 11:05	#1
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	Intel Core i7 920 D0 Stepping Overclocked to 4.6Ghz with Thermalright Ultra-120 It seems that the new stepping for the Intel Core i7 series will be a good one for overclockers; on air this D0 sample hit 4.6Ghz (up from 2.66Ghz at default) and the system is stable enough to run 3DMark06, far from bad! Considering that our guys in Prague yesterday were running Core i7 under LN2 and reaching 4.9~5Ghz 3D stable. Motherboard used was a DFI DK X58 T3eH6 and OCZ Reaper DDR3-1866 6GB; you can see the full screengrabs at the source -- Of course there are C0 stepping CPUs which do 4.6-4.7Ghz too on air cooling, but not all of them are able to; so far D0 reports are all very similar to this finding. if you check the Core i7 920 ranking at HWBot here, you'll notice that the 99% of those with higher than 4.5ghz results are using H20 or better cooling Attached Thumbnails __________________ Last edited by jmke : 18th April 2009 at 11:12.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Thermalright to replace Ultra 120 with Venomous X	jmke	WebNews	0	8th December 2009 09:23
Intel Core i7 920 2.66Ghz vs. Lynnfield 2.66Ghz	jmke	WebNews	8	18th June 2009 20:37
Intel denies Core i7 920 will be discontinued and Lynnfield won't be called Core i5	jmke	WebNews	1	4th June 2009 16:11
Intel Core i7 920 D0 Stepping Preview	jmke	WebNews	0	7th April 2009 11:25
Thermalright Ultra 120 Extreme Copper Cooler	jmke	WebNews	0	17th December 2008 16:43
Intel Core i7 920, Core i7 965 EE and Intel DX58SO	jmke	WebNews	0	16th December 2008 14:07
Intel Quad Core Yorkfield R0 stepping to arrive	jmke	WebNews	2	27th May 2008 00:55
[M] Intel Core 2 Duo E4500 M0 Stepping CPU Review	jmke	WebNews	1	16th October 2007 11:04
Intel Introduces Second Core 2 Duo Stepping	jmke	WebNews	0	16th July 2007 08:31
ThermalRight Ultra 120 Cooler	jmke	WebNews	0	26th July 2006 09:59

19th April 2009, 13:24	#2
Kougar Posts: n/a	Really makes me wonder what the Core i7 950 and 975 can do... Core i7 950 has a 23x multiplier over the 920's 20x. That's enough for 5Ghz at the same 220Mhz QPI link. Or 5.23Ghz with Turbo mode, as the screenie above is using Turbo Mode.