| jmke | 23rd January 2010 17:10 |
Intel Celeron Breaches 8.2Ghz Limit Under LN2
After system assy spend few hours to get good settings for DFI. Those who ever oced with DFI mobos know, that there are a lot of magic bios settings, which slightly affect stability. Voltage on CPU was ramped up to maximum vid 1.6000V and offset set to +130%. This is maximum, allowed by mobo. This will result 2.12-2.15V by DMM reading on CPU caps. During boot there was quite loud swirling and whizzling sounds from DFI volterra VRM. Under this music I've started to push F7 more that human hand can survive On most interesting moments I've putted my nikon on tripod near rig to make photos every second, not to lost WR moment
As for temps, booted straight from -170°C and under windows dropped temp to lowest -186..-190° possible. more than 2kg MAGNUM pot helped much, temps was stable and I had to put LN2 not continuosly. http://www.xtremesystems.org/forums/...73&postcount=1 | 
