Stefan Mileschin

BitFenix unveiled the Pandora ATX at Computex 2015. The case is a re-imagination of the original Pandora ITX case, launched last Computex, for the ATX form-factor. The Pandora ATX is scaled up in almost all ways to the original, and retains its styling. The case offers room for ATX and E-ATX motherboards, with eight expansion slot covers (so you can install a dual-slot graphics card on the bottom-most slot of your motherboard). There's room for CPU coolers as tall as 160 mm, graphics cards as long as 380 mm, and PSUs as long as 220 mm.

Storage spaces include two 3.5-inch, and three 2.5-inch internal drive bays. Cooling system is governed by a 4-channel PWM-based fan-controller, with a 2.8-inch TFT LCD display, giving you fan-speed and temperature readouts. Fan vents are aplenty, with two 140 mm (or three 120 mm) front intakes, two 140 mm (or three 120 mm) top exhausts; and a 120 mm rear exhaust. The front and top vents can each hold on to either a 3x 120 mm, or a 2x 140 mm radiator. Both these big vents have magnetic dust filters.

http://www.techpowerup.com/213272/bi...-detailed.html