Adding Automatic Power-On to a Linksys NAS

Stefan Mileschin · 26th September 2013, 06:56

We feel [Jim's] pain in having to physically press the power button to boot his Network Attached Storage device after a power outage. If you live in an area with frequent brief but annoying power blinks it wouldn’t take long to brew up your own solution. Here you can see the ATtiny45 that he added for the auto-boot.

Aside from having to go upstairs in order to reboot the machine there is also a compulsory disk check that his Linksys NAS200 performs before files are available on the network. You can see that he used an 8-pin socket which lets him remove the chip for programming. The socket gets a ground connection from the shielding of the USB port, it pulls 5V off of the linear regulator right next to it, and the green wire connects to the power button’s conductor.

The sketch compiled for the chip starts a ten second timer are power up. When the timer goes off it pulls the pin low and then high, simulating a button press. In hobby electronics it’s a common problem that we have to invent issues to use as the next project. So it’s nice to see a real life application like this one.

http://hackaday.com/2013/09/25/addin...8Hack+a+Day%29

26th September 2013, 06:56	#1
Stefan Mileschin [M] Reviewer Join Date: May 2010 Location: Romania Posts: 148,578	Adding Automatic Power-On to a Linksys NAS We feel [Jim's] pain in having to physically press the power button to boot his Network Attached Storage device after a power outage. If you live in an area with frequent brief but annoying power blinks it wouldn’t take long to brew up your own solution. Here you can see the ATtiny45 that he added for the auto-boot. Aside from having to go upstairs in order to reboot the machine there is also a compulsory disk check that his Linksys NAS200 performs before files are available on the network. You can see that he used an 8-pin socket which lets him remove the chip for programming. The socket gets a ground connection from the shielding of the USB port, it pulls 5V off of the linear regulator right next to it, and the green wire connects to the power button’s conductor. The sketch compiled for the chip starts a ten second timer are power up. When the timer goes off it pulls the pin low and then high, simulating a button press. In hobby electronics it’s a common problem that we have to invent issues to use as the next project. So it’s nice to see a real life application like this one. http://hackaday.com/2013/09/25/addin...8Hack+a+Day%29

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to Improve Your Android Phone’s Automatic Brightness With Lux	Stefan Mileschin	WebNews	0	22nd July 2013 08:02
Hulu will disable automatic Facebook sharing	Stefan Mileschin	WebNews	0	18th July 2013 20:52
Automatic Link connects phone and car for better driving	Stefan Mileschin	WebNews	0	18th March 2013 07:39
Otterbox unveils iON Intelligence iPhone case with automatic power management	Stefan Mileschin	WebNews	0	9th January 2013 11:48
Automatic bank robbers making a killing	Stefan Mileschin	WebNews	0	27th June 2012 07:46
Microsoft To Begin Automatic IE Upgrades For Users	Stefan Mileschin	WebNews	0	16th December 2011 07:01
Windows XP SP3 automatic updates kick off tomorrow	jmke	WebNews	0	9th July 2008 22:06
Power a Linksys WRT54G over Ethernet (no more External PSU needed)	jmke	WebNews	3	14th August 2007 18:12
Linksys WRT54G	AngeluS	Hardware/Software Problems, Bugs	3	7th February 2006 13:28
Zephyrus Automatic System Controller	Sidney	WebNews	0	7th November 2004 18:16