New WC coming in - Page 4

jmke · 12th January 2006, 23:28

s&m supports 2 CPU
prime95 is average ok for CPU temp

try K7Burn instead.. twice.. I think it will surpass S&M
www.madshrimps.be/files/mirrors/K7burn.rar

187(V)URD@ · 12th January 2006, 23:45

The same because my Delta temp remains the same.
My water is now a bit hotter because of stressing the cpu's for 2 hours.
My idle is now 30°C because of the passive setup and stress with K7Burn was 41°C with the same voltage and frequentie settings.

Pfft I'd better reapplyed my previous wc on my opteron, who knows I didn't had to order a new wc setup

jmke · 12th January 2006, 23:49

dont the "who knows" in that last sentance

Sidney · 12th January 2006, 23:58

187(V)URD@,
What MB do you use? And, will you post PWM temp.
I am getting over 65°C PWM temp at 1.55volt.

187(V)URD@ · 13th January 2006, 00:35

DFI Ultra-D but I am getting also +60°C with full load and no fans.
My other setup does about 38-42°C with fan on it.

http://service.futuremark.com/compare?3dm05=1691525

x2 2.6ghz - 7800gt 450/1120mhz

Sidney · 13th January 2006, 02:27

Single core is entirely different; mine with CV+ memory fan on the PMWIC it was about the same as yours.

Unless no vcore increase or less than 1.4V, Dual Core 1x2MB will put alot on the motherboard circuit. I hope the DFI Expert may solve this issue. For now, the limit will be on the PWM temp over CPU temp.

187(V)URD@ · 13th January 2006, 11:10

The PMW can take a beating

. I wouldn't be suprised if it hits 80°C in the summer but active cooling wouldn't harm

.

Btw what graca do you got?

jmke · 13th January 2006, 11:32

80°C is in my humble opinion too hot for PWM is you are overclocking, would not surprise it at all if you see random crashes at that PWM temp and you have to lower your OC

Sidney · 13th January 2006, 14:36

I am not a gamer

, using 6200 still and satisfied with the FPS, soft modded to 6600. Using latest driver it is called 6700XL.

jmke · 13th January 2006, 14:41

new product from NV?

12th January 2006, 23:28	#31
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	s&m supports 2 CPU prime95 is average ok for CPU temp try K7Burn instead.. twice.. I think it will surpass S&M www.madshrimps.be/files/mirrors/K7burn.rar __________________

12th January 2006, 23:45	#32
187(V)URD@ Member Join Date: Jan 2004 Posts: 923	The same because my Delta temp remains the same. My water is now a bit hotter because of stressing the cpu's for 2 hours. My idle is now 30°C because of the passive setup and stress with K7Burn was 41°C with the same voltage and frequentie settings. Pfft I'd better reapplyed my previous wc on my opteron, who knows I didn't had to order a new wc setup __________________ AMD Opteron 146@3ghz H2O Storm \| DFI NF4 Ultra-D \| 2512MB Gskill LE \| X800GTO²@X850XT-PE \| 2250GB Hitachi \| Modded Aopen H600B\| Seasonic 600W \| MX510@450HZ \| 19\" TFT BenQ 937s+ \|3DMARK2001 AMD XP2400+@2600+ \| Epox 8rda+ \| 2*256 Twinmos BH5 \| Club3D 9600Pro \| Maxtor 80GB + 200GB \| server + moviestation \|

12th January 2006, 23:49	#33
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	dont the "who knows" in that last sentance __________________

12th January 2006, 23:58	#34
Sidney Member Join Date: Mar 2004 Posts: 15,738	187(V)URD@, What MB do you use? And, will you post PWM temp. I am getting over 65°C PWM temp at 1.55volt. __________________ lazyman Opteron 165 (2) @2.85 1.42 vcore AMD Stock HSF + Chill Vent II

13th January 2006, 00:35	#35
187(V)URD@ Member Join Date: Jan 2004 Posts: 923	DFI Ultra-D but I am getting also +60°C with full load and no fans. My other setup does about 38-42°C with fan on it. http://service.futuremark.com/compare?3dm05=1691525 x2 2.6ghz - 7800gt 450/1120mhz __________________ AMD Opteron 146@3ghz H2O Storm \| DFI NF4 Ultra-D \| 2512MB Gskill LE \| X800GTO²@X850XT-PE \| 2250GB Hitachi \| Modded Aopen H600B\| Seasonic 600W \| MX510@450HZ \| 19\" TFT BenQ 937s+ \|3DMARK2001 AMD XP2400+@2600+ \| Epox 8rda+ \| 2*256 Twinmos BH5 \| Club3D 9600Pro \| Maxtor 80GB + 200GB \| server + moviestation \|

13th January 2006, 02:27	#36
Sidney Member Join Date: Mar 2004 Posts: 15,738	Single core is entirely different; mine with CV+ memory fan on the PMWIC it was about the same as yours. Unless no vcore increase or less than 1.4V, Dual Core 1x2MB will put alot on the motherboard circuit. I hope the DFI Expert may solve this issue. For now, the limit will be on the PWM temp over CPU temp. __________________ lazyman Opteron 165 (2) @2.85 1.42 vcore AMD Stock HSF + Chill Vent II

13th January 2006, 11:10	#37
187(V)URD@ Member Join Date: Jan 2004 Posts: 923	The PMW can take a beating . I wouldn't be suprised if it hits 80°C in the summer but active cooling wouldn't harm . Btw what graca do you got? __________________ AMD Opteron 146@3ghz H2O Storm \| DFI NF4 Ultra-D \| 2512MB Gskill LE \| X800GTO²@X850XT-PE \| 2250GB Hitachi \| Modded Aopen H600B\| Seasonic 600W \| MX510@450HZ \| 19\" TFT BenQ 937s+ \|3DMARK2001 AMD XP2400+@2600+ \| Epox 8rda+ \| 2*256 Twinmos BH5 \| Club3D 9600Pro \| Maxtor 80GB + 200GB \| server + moviestation \|

13th January 2006, 11:32	#38
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	80°C is in my humble opinion too hot for PWM is you are overclocking, would not surprise it at all if you see random crashes at that PWM temp and you have to lower your OC __________________

13th January 2006, 14:36	#39
Sidney Member Join Date: Mar 2004 Posts: 15,738	I am not a gamer, using 6200 still and satisfied with the FPS, soft modded to 6600. Using latest driver it is called 6700XL. __________________ lazyman Opteron 165 (2) @2.85 1.42 vcore AMD Stock HSF + Chill Vent II

13th January 2006, 14:41	#40
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	new product from NV? __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DUH! News of the Day: SSD to grow steadily over the coming years	jmke	WebNews	0	18th May 2010 08:08
NVIDIA Ion 2 coming in early 2010, compatible with Pine TrailNVIDIA Ion 2 coming in e	jmke	WebNews	0	23rd December 2009 09:47
ATI Radeon HD 4860 Coming?	jmke	WebNews	0	29th July 2009 13:13
ATI Radeon HD 4890 Shown Naked, Real Benchmarks Coming	jmke	WebNews	0	19th March 2009 19:22
Faster SATA standard coming in second quarter of this year	jmke	WebNews	0	8th January 2009 15:19
Club 3D 9600 GT Overclocked Edition 512MB - coming soon	jmke	WebNews	0	4th April 2008 13:18
Star Wars: Battlefront II & Revenge of the Sith DVD coming November 1st	jmke	WebNews	0	26th July 2005 16:29
Half-Life 2 Coming to Xbox, Harry Potter and the Goblet of Fire Movie	jmke	WebNews	0	19th July 2005 08:26
Half-Life 2 HDR coming soon	jmke	WebNews	0	14th February 2005 10:43
EPOX Coming With Geforce FX Cards...	Mavke	WebNews	0	8th February 2004 22:42