wanted: buyers for 80W pelts I know most of ous have a phase changed cooling system, but almost none (yes Gamer, you do :) ) have a decent cooling setup for their vidcard. Most "mad" OC'ers use a HēO & 80W pelt for their vidcard. Since they're pretty expensive in Be (60 @ loveno) i was thinking of buying OPP's 480W waterchiller . It has been on sale since april and isn't sold yet. It uses 6 80W pelts and we can get it for ~150 incl shipping (that's 25 a piece ladies and gentlemen :) ). I'd buy it right away but 6 pelts seem a bit like an overkill. :) Anyone from Benelux interested? |
Well, I'm interested, but just can't tell you now if I'm in :( (exams, money,...) I'll let you know :) |
how did he use this thing... 8 pelts??? where to put them... no problem, I can finance this piece of equipent if needed. you make the deal, i pay the stuff, and we split it up afterwards. |
@Calantak: 3 80 watt pelts on each site = water temps below 0C... *sweet* Thank you for willing to finance it, if I could cough up the entire sum I'd pay it and sell those 80W pelts later, but I'm short on cash the 8500 accident. :) I'm only interested in the pelts though, not in the slot 1 coldplates. I'm gonna ask whether he's willing to dismantle the thing and only ship the pelts, it would save quite a lot of shipping costs. Keep you guys posted. :) |
same here if needed. |
just ask opp how much it would come shipped, if that's reasonable, we get the whole load! |
Quote:
I asked whether it's a big difference in s&h if he ships it without the coldplates. Can anyone do something usefull with those coldplates? 4 potential buyers (me, Calantak, Gamer, fredperry) in less than an hour, I guess 2 more wouldn't be hard to find. I'm gonna order it as soon as he replies. :) |
Just read that someone @B2OC wants to buy the last 2. :) Edit: s&h costs 26$ which makes the total cost 151$ or 170 (28 a pelt, still half the price of what we pay here.). Package should arrive in 2-3 days :o Neato, now I just got to figure out how pay pal works. :) |
I'v got a 80 watt pelt, maybe next price for madshrimps ? |
interested! need to change cooling to something with less air-movement :) |
I told OPP i'm gonna buy it, just waiting for Paypal's confirmation of my account... could take a few days. |
can i use a 80w pelt under a maze3? |
no use... for a cpu I think you need more power, especially when overclocking which I know you will do |
That's the problem when you work late, you miss all the bargains I hope i have better luck next time. :( |
I sold two under conditional promise: I'll see you get one bicker ;) By the way: :ws: OPP :ws: He's (probably) gonna send a 8500 Retail box too, because he heard I couldn't get warranty without one. Now that's what I call a nice gesture. :super: |
great, thx !! |
Quote:
|
RichBa5tard, I have the Radeon Box and will ship the Chiller in the R-Box Tomorrow. Don't forget to send the Cash:D OPP |
Thanks OPP :super: I'll keep you posted when PayPal activates my account. If it takes too long I'll send you the money by snail mail. |
$$$ and not I hope :) |
Quote:
|
Beki, I'll let you know when it arrives. :) |
are all peltier sold? cos want 2 of them:grr: |
2 = no go, 1, perhaps :) |
RichBa5tard, Shipped out your stuff today, that baby wieghed in at almost 5 pounds:D I used a Radeon box and it has all the Radeon stuff in it that comes with the card, driver disk, connectors, all that stuff, just throw your card in there and your good to go. OPP |
OPP, Damn, you might as well had put in an actuall R8500 in there too! =) j/k Thanks a lot, there's no way they can refuse to give me garanty now! :ws: FYI: my previous payment with my VISA card took 8 days to be registered, so I'm guessing it would take equally long for me to get registered at PayPal. |
Quote:
|
I was just looking into the pelt-stuff, and it seems you also need a thing called "cold-plate"? Are they really necessary ore more an improvement? |
They're really necessary: pelts need a lot of pressure to work decently. You'll need a copper plate so you squeeze the pelt between your HS/WB and the plate. |
k thx, next question: what size is best: 1,2 or 3 mm (the thicker the more pressure i presume) and are they available in a shop here in Belgium? |
g o to a do-it-yourself shop. ask 4 red koper and some sandpaper and lap it. make some holes (i assume u have driller???; don't know word for "boor") and u have yourself a coldplate |
a cold-plate is not needed on a GPU, works better without. got a link where they tested it, but lost it, sorry.... |
Quote:
Doesn't hurt to try it out, we shall see in a couple days. :) |
RichBa5tard, Did you get the PM I sent you?? OPP |
I've read it and replied, thanks a lot m8! |
Ok, I've got 6 80W pelts lying here: - one for me - one for JMke - one for Bicker - one for Calantak So, Gamer & fredperry you want one or not? Just to give you an idea, my GF DDR (120Mhz GPU) peltcooled runs without hickups @ 178Mhz, that's a 48% OC ladies and gentlemen. :D If one of you guys don't buy one, they go to B2OC & vegata. Edit: I payed 160 for six, so 27 a piece. Consider them yours for 30 shipping included. |
are you gonna test the 6 pelts together? If not, i can drop by your place in Leuven on Thursday (+/- 10.30u) and pick the pelts for jmke, calantak and myself up, if that's ok with them? |
That's ok by me. I'm not gonna test the six pelts together: need another PSU & pump for that. Can't wait long enough. :) Just see you don't come to late (arf, sounds like pr0n to me :gay: ), I've got an exam at 13.30u: 10.30u would be fine. :) |
I think you got buyers enough, I dont really need one RB. sell them to the other people, they need it more than me :) Ive got a 80 watt peltier, remember :) was just trying to help if nobody needed it. |
ok with me! |
All times are GMT +1. The time now is 22:55. |
Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO