Madshrimps Forum Madness

Madshrimps Forum Madness (https://www.madshrimps.be/vbulletin/)
-   Mad Bargains (https://www.madshrimps.be/vbulletin/f17/)
-   -   intresse in P4a 2.8 prescott 1mb cache 533fsb? (https://www.madshrimps.be/vbulletin/f17/intresse-p4a-2-8-prescott-1mb-cache-533fsb-9808/)

kristos 8th November 2004 15:24

intresse in P4a 2.8 prescott 1mb cache 533fsb?
 
Allereerst ben ik nog niet 100% zeker of ze te verkrijgen zijn:

ze staan niet in het stock bestand maar wel in het real time stock bestand (6 in't totaal).

normaal gezien kan de real time stock lager zijn (als er bijvoorbeeld cpu's uit stock zijn gehaald) of gelijk zijn aan de stock maar nooit hoger. daarom dat ik niet zeker ben of ze ze nu hebben of niet.


voor de rest, de titel lijkt me duidelijk genoeg ;)

voor de prijs, 160€ acceptabel? ze staan aan 170€ op k&m electronic en da's zonder verzendkosten...

piotke 8th November 2004 16:23

vanwaar komen ze ?

kristos 8th November 2004 16:36

Ingram... via pa

kristos 9th November 2004 14:07

ok ik heb bevestiging; er zijn er nog 5 op stock.

morgen wordt er besteld.

jmke 9th November 2004 14:16

prijs te hoog, anders was het wel intressant

kristos 9th November 2004 20:42

tja, wat wilt ge, 't zijn nieuwe (boxed zei pa) hé.
ze staan aan 140€ btw exclu bij ingram. transport erbij is nog es 15€ en op die van mij wint pa ook al nix dus da's maar 65€ winst op 5 procs dat mijn pa hier uit haalt.

piotke 9th November 2004 20:45

maar 65 € winst op 5 cpu's...

das 15 € per cpu, das een normale winstmarge voor een pc zak ze...

Gamer 9th November 2004 21:10

even nadenken :)

piotke 9th November 2004 21:14

minder dan 15 € zelfs, zucht kopke wil weeral es niet meerwerken :)

easypanic 9th November 2004 21:38

Mja, ik begin hier ook te twijfelen...

[M]-contest iemand? :D

kristos 10th November 2004 12:51

well, I had to order and there were only 3 left so I ordered them all :)

gonna pick em up at dad's tonight and hopefully I'll find the time to do some serious clocking tomorrow :D

kristos 10th November 2004 18:53

dad ran out of time, won't have them untill monday or tuesday next week :/

well, I still got my current cpu to play with:

2.8 northy @3850 (275fsb) stable on air :o might not be rocksolid, didn't have time to test that yet.
at 280fsb, it's definately my ram holding me back (sync).

easypanic 10th November 2004 21:57

Set it async buddy !!

Let it bleed :D.

Da_BoKa 10th November 2004 23:07

with what mobo is that?

kristos 10th November 2004 23:07

sir yes sir!!

:D

Da_BoKa 10th November 2004 23:55

Quote:

Originally posted by kristos
sir yes sir!!

:D

no need for that ;) , you can just call me Da_BoKa!

no, with what mobo?

kristos 11th November 2004 16:01

ah, didn't see you sneaked a post in, you probably guessed but just for the record, that was aimed at easypanic :)

board = p4c800e deluxe

jmke 11th November 2004 16:03

max FSB ?

kristos 11th November 2004 16:13

haven't done any further testing yet so 275-280 is highest I did so far on this board. as mentioned above 280 fsb wasn't stable but I think it's due to the ram not being able to cope anymore.

jmke 11th November 2004 16:16

where do you live? (don't worry, I'm going somewhere with this;))

kristos 11th November 2004 16:39

Lubbeek, 10 -15 minutes towards Tienen or Diest from Leuven out.

well, I may have been wrong about the ram, so that leaves the board , bios settings or the cpu to blame

temps are A-OK, even if I you take the overly optimistic readings from asus into account. were 36 in prime, turned window open to provide some cool fresh air.

jmke 11th November 2004 17:02

Diest is a bit to far from me, otherwise I would have stopped by with some DDR600 sticks

kristos 12th November 2004 14:35

Most kind :ws:

but the ddr600 is not an absolute must offcourse, although it would be very nice :D

cpu is now stable at 280fsb and 1.7V bios (skipped the 1.675 setting), all others weren't stable. also had to disable "performance mode" to maintain stability in prime.

jmke 12th November 2004 15:03

please re-read this phrase man:)

Quote:

Originally posted by jmke
Diest is a bit to far from me, otherwise I would have

easypanic 12th November 2004 15:11

Hehe, I ordered me a 3.0GHz Prescott and a DFI 875P. :)

kristos 12th November 2004 19:02

Quote:

Originally posted by jmke
please re-read this phrase man:)


I know I know :p

but that you even considered it I found most kind, especially because you don't even know me other then from this forum :)


easypanic : who did you buy your DFI from and what did you pay for it :)

easypanic 13th November 2004 18:46

kmelektronik.de , see prices for it ;).

easypanic 14th November 2004 13:10

Ordered me some A-data Vitesta with TCCD-chips :).

Will be a nice setup :D.


All times are GMT +1. The time now is 17:32.

Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO