1 week to find a good SocketA mobo

18th February 2006, 00:45

Well my main PC finally died as well due to popped caps.
Big problem, since now I need a new socket A motherboard. (preferably before FOM, end of next week)
I have an Asus A7N8X-XE but it stinks, no adaptable voltages (but I can boost my FSB) and the netword controller won't install (windows finds it but won't accept the drivers)

So does anyone know a store/person that sells any decent (NF2 based) socket a motherboard? (Belgium only)
I'll buy you a drink or 2 at FOM, or wherever I might run into you.

18th February 2006, 01:03

If you are a bit handy, solder some new caps on the motherboard?!

Unsolder them, go to your local HW shop and ask for such a ( better ) capacitators.

I have a EPoX 8k5a2+ lying here waiting for some new caps.

I don't think youl find a new motherboard in shops.

18th February 2006, 11:32

Tried that with the last board.
kinda got, well, screwed. (I couldn't empty the holes with a pump so I drilled them out

) Also an Epox 8RDA+

I could try it again with what I have learned from last time. (patience is your friend)
But I've got so little time. I already asked my work for as many days off as they can spare next week.

--EDIT--
Oh, and it doesn't have to be new, a good second hand board should do as well.

[Bonbon] · 18th February 2006, 13:31

check mpl.be

ASRock K7NF2-RAID / Socket 462 / nVIDIA nForce2 Ultra 400 / etc ..

51 euro

18th February 2006, 20:36

I'll take my chances with the caps. (luckily the ones from the previous attempt are still intact)
I'd rather be without main PC for a couple of months, than touch an asrock.

easypanic · 18th February 2006, 20:39

Freestyler, I could send you a A7N8X I have here lying around, if it is of any use, please let me know.

It only has some sealstring on it ( leftover from my former Prometeia).

19th February 2006, 00:09

I'm currenty trying to fix the epox. So far it's working, edging our the ZEN and yoga meditation to keep calm, but patience IS the key.

If it goes up in flames I'll let you know. (that would be tomorrow)

19th February 2006, 01:34

I guess I'll take it.
The epox doesn't do the errors it did before, but now it's just a constant 7F error. Only think I didn't try is the CPU, but that should be working (it did a week ago).

When can I pick it up, and what to you want for it.
(I'll PM this as well)

19th February 2006, 02:38

Hold the press.

I just retouched all the solder points and we got an image !!!

So I don't need a new mobo that urgently.
I might still be interested in the asus, but not that urgently anymore.

18th February 2006, 00:45	#1
FreeStyler Posts: n/a	1 week to find a good SocketA mobo Well my main PC finally died as well due to popped caps. Big problem, since now I need a new socket A motherboard. (preferably before FOM, end of next week) I have an Asus A7N8X-XE but it stinks, no adaptable voltages (but I can boost my FSB) and the netword controller won't install (windows finds it but won't accept the drivers) So does anyone know a store/person that sells any decent (NF2 based) socket a motherboard? (Belgium only) I'll buy you a drink or 2 at FOM, or wherever I might run into you.

18th February 2006, 13:31	#4
[Bonbon] Member Join Date: Jun 2002 Posts: 692	check mpl.be ASRock K7NF2-RAID / Socket 462 / nVIDIA nForce2 Ultra 400 / etc .. 51 euro __________________ intelD820 (2*2.8), 1gb ram , 6600gt , lots of hdd

18th February 2006, 20:39	#6
easypanic Member Join Date: Mar 2003 Posts: 1,823	Freestyler, I could send you a A7N8X I have here lying around, if it is of any use, please let me know. It only has some sealstring on it ( leftover from my former Prometeia). __________________ \|^^^^^^^^^^^^^^^^^^\\|\|____ \|....The BEER TRUCK.... \|\|\|\|'""\|""°\_,__ \|___Just for You___l\|\|__\|__\|___\|) _____\| \|(@)(@)""""""""""""\|(@)(@)**\|(@)\|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
socket A mobo.	kr15t0f	Mad Bargains	3	16th December 2004 23:58
Problem with new mobo Abit KV8 pro	dorfke	Hardware/Software Problems, Bugs	6	4th October 2004 23:23
Which mobo for oc	Vulk	Hardware Overclocking and Case Modding	14	25th July 2004 18:59
n00b lookin for a good kit	rahvin708	Hardware Overclocking and Case Modding	4	17th July 2004 23:05
MoBo going dead ??	the maniak	Hardware/Software Problems, Bugs	6	12th December 2003 14:04
1 week holiday	stronken	Site & Forum Feedback - Folding@Home	2	28th June 2003 17:15
Where is the mobo temp. sensor located?	GiantKiller	Hardware/Software Problems, Bugs	4	15th June 2003 14:52
New mobo: help me choose	Xploited Titan	Mad Bargains	9	31st May 2003 06:00
mobo doesn't start up	biCker	Hardware/Software Problems, Bugs	16	18th September 2002 14:23
HOW-TO: find max FSB / CPU Speed	jmke	FAQ / INFO / HOW-TO	0	25th May 2002 18:13

18th February 2006, 01:03	#2
Da_BoKa Posts: n/a	If you are a bit handy, solder some new caps on the motherboard?! Unsolder them, go to your local HW shop and ask for such a ( better ) capacitators. I have a EPoX 8k5a2+ lying here waiting for some new caps. I don't think youl find a new motherboard in shops.

18th February 2006, 11:32	#3
FreeStyler Posts: n/a	Tried that with the last board. kinda got, well, screwed. (I couldn't empty the holes with a pump so I drilled them out ) Also an Epox 8RDA+ I could try it again with what I have learned from last time. (patience is your friend) But I've got so little time. I already asked my work for as many days off as they can spare next week. --EDIT-- Oh, and it doesn't have to be new, a good second hand board should do as well.

18th February 2006, 20:36	#5
FreeStyler Posts: n/a	I'll take my chances with the caps. (luckily the ones from the previous attempt are still intact) I'd rather be without main PC for a couple of months, than touch an asrock.

19th February 2006, 00:09	#7
FreeStyler Posts: n/a	I'm currenty trying to fix the epox. So far it's working, edging our the ZEN and yoga meditation to keep calm, but patience IS the key. If it goes up in flames I'll let you know. (that would be tomorrow)

19th February 2006, 01:34	#8
FreeStyler Posts: n/a	I guess I'll take it. The epox doesn't do the errors it did before, but now it's just a constant 7F error. Only think I didn't try is the CPU, but that should be working (it did a week ago). When can I pick it up, and what to you want for it. (I'll PM this as well)

19th February 2006, 02:38	#9
FreeStyler Posts: n/a	Hold the press. I just retouched all the solder points and we got an image !!! So I don't need a new mobo that urgently. I might still be interested in the asus, but not that urgently anymore.