nt4 - Page 2

2nd April 2003, 14:25

ik heb een adsl verbinding bij PI moet ik dan voor dns adres bij de host primair 194.119.232.3, secondair 195.95.30.167 intypen?

jmke · 2nd April 2003, 14:27

Yep
diegene die je nu krijgt als je ADSL rechtstreeks op uw PC hangt

9th April 2003, 03:21

just installed NT 4

everything is configged, IE seems to work on this machine (host). but how I make a connection to a machine running winxp?
I gave the NIC that's hooked up at my switch his static IP and DNS adress, but I dont 'see' the host in the workgroup

working in windows goes really faster, but gotta luv this old IE and paint without .jpeg

9th April 2003, 18:33

:rod:

installed SP6 btw

jmke · 9th April 2003, 18:42

start -> run
\\ip_addy_of_target_system

9th April 2003, 22:53

nope, don't find it when i connect to 192.168.0.1

and how do I share my inet connection btw?

10th April 2003, 16:22

ok it works

NIC to Teleslet : DHCP
NIC to LAN:
ip: 192.168.0.1
subnet: 255.255.255.0

advanced tab of Telenet properties: check"enable IP routing"

on clients

192.168.0.x
255.255.255.0
gateway: 192.168.0.1

dns: 195.130.132.18
dns2: 195.130.132.17

it works, thx

jmke · 10th April 2003, 17:26

you're welcome TeuS

(replied that in PM

2nd April 2003, 14:27	#12
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	Yep diegene die je nu krijgt als je ADSL rechtstreeks op uw PC hangt __________________

9th April 2003, 18:42	#15
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	start -> run \\ip_addy_of_target_system __________________

10th April 2003, 17:26	#18
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	you're welcome TeuS (replied that in PM __________________

2nd April 2003, 14:25	#11
Tarsius Posts: n/a	ik heb een adsl verbinding bij PI moet ik dan voor dns adres bij de host primair 194.119.232.3, secondair 195.95.30.167 intypen?

9th April 2003, 03:21	#13
TeuS Posts: n/a	just installed NT 4 everything is configged, IE seems to work on this machine (host). but how I make a connection to a machine running winxp? I gave the NIC that's hooked up at my switch his static IP and DNS adress, but I dont 'see' the host in the workgroup working in windows goes really faster, but gotta luv this old IE and paint without .jpeg

9th April 2003, 18:33	#14
TeuS Posts: n/a	:rod: installed SP6 btw

9th April 2003, 22:53	#16
TeuS Posts: n/a	nope, don't find it when i connect to 192.168.0.1 and how do I share my inet connection btw?

10th April 2003, 16:22	#17
TeuS Posts: n/a	ok it works NIC to Teleslet : DHCP NIC to LAN: ip: 192.168.0.1 subnet: 255.255.255.0 advanced tab of Telenet properties: check"enable IP routing" on clients 192.168.0.x 255.255.255.0 gateway: 192.168.0.1 dns: 195.130.132.18 dns2: 195.130.132.17 it works, thx