It appears you have not yet registered with our community. To register please click here...

 
Go Back [M] > Hardware Madness > General Madness - System Building Advice > FAQ / INFO / HOW-TO
INFO: Unofficial Opteron 939 information thread (DFI-Street) INFO: Unofficial Opteron 939 information thread (DFI-Street)
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read


INFO: Unofficial Opteron 939 information thread (DFI-Street)
Closed Thread
 
Thread Tools
Old 17th January 2006, 16:03   #1
Madshrimp
 
jmke's Avatar
 
Join Date: May 2002
Location: 7090/Belgium
Posts: 78,611
jmke has disabled reputation
Default INFO: Unofficial Opteron 939 information thread (DFI-Street)

NOTICE: DFI DOES NOT SUPPORT THE USE OF OPTERON PROCESSORS WITH THEIR MOTHERBOARDS. IF YOU CHOOSE TO USE AN OPTERON, KNOW THAT YOU ARE EMPLOYING HARDWARE THAT HAS NOT BEEN SPECIFIED FOR YOUR BOARD. THUS, YOU SHOULD NEITHER EXPECT NOR REQUEST SUPPORT FROM ANGRY, RGONE, OR ANY EMPLOYEE OF DFI. THIS NON-SUPPORT STATUS HAS BEEN MANDATED BY AMD, AND IS UNLIKELY TO CHANGE IN THE FORESEEABLE FUTURE.

Ok guys, as more and more of us pick up these wicked-bad Opterons, it only makes sense to consolidate our questions, comments, and information into a single thread. Most of my knowledge of these chips has come from the good folks at Xtreme Systems. They have a lengthy thread over there that is an excellent source for those wanting to learn more about Opterons, including numerous benchmarks. If you are looking for results and/or steppings, you might try this German site (for both single core and a few dual cores) or this Australian site (OCAU - some great clockers down under), as both have done a good job organizing their users' data. Below you will find some general information that I have gathered from the collective experience of many, many knowledgeable people all over - thanks to all for your hard work.




Why do People Keep Talking about Opterons? What's the Big Deal? Before the Socket 939 Opterons were even actually released, their was a good deal of buzz about the opportunity to obtain a relatively inexpensive CPU that would boast a 1Mb L2 Cache. Of particular interest were the lower numberd models (the 144 and 146), which essentially promised to be the first entry level San Diego cores - and that at a price lower than the 3000+/3200+ Venices. Needless to say, people were excited. When the Opterons finally arrived, many of the early adopters quickly realized that their chips were absolutely tremendous overclockers. During those early weeks, forums were flooded with example after example of single core Opterons achieving SuperPi stability at 3GHz (or more) - and doing so on air at just above stock voltages. Results such as these fomented the growth of the initial pre-release buzz into a full blown hysteria, and was the genesis of the current hype over 939 pin Opterons.

An Important Note Regarding the Interpretation of Results:
The majority of Opteron owners are posting at XS. It should be known that there is a major cultural difference between XS and dfi-street regarding measuring stability. There, stability is often taken to mean SuperPi 32M completion, whereas here stability is more often accepted to be 8+ hours prime stable. The numerous results at XS at 3.0GHz are predominantly 32M stable, and not necessarily (though possibly) prime stable. You should base your expectations of an Opteron's performance with this information in mind.

Any Further Advantages? Since Opterons are designed for the high stress environments of servers, it is speculated that they are cast using better silicon than Athlons. This may explain their apparent success. It is further speculated that they have better on-die memory controllers for the same reasons. These speculations are at least partially confirmed by available results, several users comparing their memory controllers to their FX-57's.

Availability: Opterons are rather difficult to come by. The demand far exceeds the supply. Monarch, ZZF, and Newegg are known to carry them on and off, but you should also look at smaller distributors (Ewiz, Compumusic, Tankguys, etc.). There are also independents with access to Opterons – see the For Sale/Trade thread here at DFI-street for such an independent. Don't forget about Froogle. In any event, patience and persistence will be required.Opterons are rather difficult to come by. The demand far exceeds the supply. Monarch, ZZF, and Newegg are known to carry them on and off, but you should also look at smaller distributors (Ewiz, Compumusic, Tankguys, etc.). There are also independents with access to Opterons – see the For Sale/Trade thread here at DFI-street for such an independent. Don't forget about Froogle. In any event, patience and persistence will be required.

Word has been floating around the net that AMD has begun to take steps to restrict the availability of Opterons to owners of non-workstation boards, i.e. the overclocking community at large. These rumors have recently been confirmed by the manager of AMD's Opteron Division. At the present time, it is AMD's intention to no longer supply Opterons through regular retail channels once the current supply is exhausted (though this is subject to change in the future). Thus, in the near future it will likely be the case that the only Opterons available to enthusiasts will be the handful that leak through the Gray Market. I therefore recommend that if you are considering purchasing an Opteron, you do so without delay – you may not have the opportunity to do so in the future! Thanks to Ben at TankGuys for this information.

Model Numbers:: Multipliers are downward unlocked and upward locked – just like AMD64’s.

Single Core Chips: 144:200x9; 146:200x10; 148:200x11; 150:200x12; 152:200x13, 154:200x14
Dual Core Chips: 165:200x9; 170:200x10; 175:200x11; 180:200x12

Single Core Steppings: The list below is a general guide to the strength of steppings from best to worst (as determinded by their probability of reaching 3GHz):

1. CABNE 05xx (excluding 0540) / CABYE 0540
2, CABNE 0540 / CABYE 05xx (excluding 0540)
3. CAB2E 05xx
4. CABGE 05xx

It should be known that CAB2E's are more variable than other steppings. They are a bit hit or miss, a fact which diminishes their probability of hitting 3GHz. 146 CAB2E's seem stronger than 144 CAB2E's do. Recently, weeks later than 0540 have begun to show up, but we do not have many results yet.

Dual Core Steppings:
At this time, the single most important factor determining the strength of dual core Opterons is the week number. As of now, there are two steppings: week 0530, and everything else. 0530's have the potential to flirt with 3GHz, though most have fallen shy. Non-0530's thus far tend to clock between 2.6GHz and 2.75GHz. Some interesting new steppings with weeks later than 0540 are now coming out; results pending.

Temperatures and Cooling: Opterons run hotter than Athlons. Single core maximum temperatures are rated between 65C and 71C, while dual cores are rated between 49C and 65C (AMD specs). The insane overclocks (over 3.4 GHz) are all on phase. An XP-90 and good case flow may be sufficient for 3GHz on a single core (depending largely on stepping), but in all cases water cooling will likely give you a boost in your overclock. This may be even more true in the case of dual cores since they are not rated to run as hot.

Removing the IHS has led to dramatic temperature decreases for many users. For information on removing the IHS, look here and search other forums. Be advised that this is a potentially CPU-killing procedure with inherent risks invlolved. Do your research or you'll be sorry. If you use a clip-on HS such as an XP-90, additional precautions must be exercised. Since clip-ons are very difficult to apply with even pressure, you run the risk of crushing the edges and/or corners of the exposed chip, and that is quite obviously very bad. In a stroke of genius, nomad has suggested a workaround that results in a ghetto screw-on heatsink. Remove your bracket from the board, clip the HS on, then position the HS/bracket unit over your CPU (after applying a small amount of TIM, of course). Then screw the bracket/HS unit back on, turning the screws on each side alternately, a little at a time. For more info, search the above link for "XP-90." For best contact, it should be noted that removing the IHS removes about 1mm of height, so one should shave down the contacts on the underside of the bracket about 1mm. Know that the use of any of the above techniques is solely at your own risk! Also know that removing the IHS will void your CPU's warranty!!!

Memory: As with all other socket 939 CPUs, 939 pin Opterons do not work with registered/buffered memory. They require unregistered memory. Don’t confuse these chips with the 940 pin models. Excellent results have been achieved with both TCCD and BH-5. It is widely held that they are very sensitive to both read preamble and max asynchronous latency, so if you are having difficulty, try adjusting these settings. Users commonly use 9/7.5, 9/7, 8/6, and 8/5.5. It appears that Opterons, like Athlons, will not run 4x512 at 1T. Some have had problems using dividers (usually 180 and/or 166). If you are having problems passing SuperPi or Prime95 large FFT's, run your memory at 2T. Subsequent success indicates that your memory is the problem, not your CPU.

Motherboard Compatibility and BIOS: I have not seen any reports of incompatibilities with DFI boards (nF3 or nF4). In fact, the vast majority of users are using DFI nF4 boards. All other socket 939 boards should be fine. On nF3 boards, BIOS versions 711, 815, and 824 all work. On nF4, it may be difficult to acheive 7.5 read preamble with BIOS 623-3, but 704-2BT 510-xFIX do not have this problem.

Please post any questions, comments, and especially BENCHMARKS here. Also, let me know if I should include any more information above.


148 CABNE 0528GPMW

nF4 Ultra-D results. Still learning this board; will probably tighten up a bit as I gain experience. However, I will probably not be running these settings 24/7 since I can run 3GHz stable at just over 1.4V - a 0.2V increase for a .1GHz gain is probably not a sound decision on air.


Prime, 3D2001, Everest read, idle temps:





3D2003, SuperPi 1M, Sandra, Everest write:




3D2005, SumperPi 32M, A64 Tweaker, Everest latency, load temps:





Source: http://www.dfi-street.com/forum/showthread.php?t=26642
__________________
jmke is offline  
Old 17th January 2006, 16:40   #2
[M] Reviewer
 
Sidney's Avatar
 
Join Date: Mar 2004
Posts: 15,739
Sidney Freshly Registered
Default

XP-90 mouting is CPU-pin breaker to begin with. Unmount it with extreme caution as the spring load could easily pop the CPU out of the socket bending the pins along the way.
__________________
lazyman

Opteron 165 (2) @2.85 1.42 vcore AMD Stock HSF + Chill Vent II
Sidney is offline  
Closed Thread


Similar Threads
Thread Thread Starter Forum Replies Last Post
DFI announces their NF680i based motherboard - Best Intel OC board? jmke WebNews 0 26th April 2007 14:38
Socket 939, 940 Opteron phase-out plan revealed jmke WebNews 0 3rd April 2006 22:18
[FS] Opteron 146 & Dual Core 165 Socket 939 [CLOSED] computersmsa For Sale 357 14th December 2005 21:34
AMD Denies Phase Out of Opteron Chips for Socket 939 jmke WebNews 1 14th December 2005 16:42
3GHz Socket 939 OPTERON for $200?! Sidney WebNews 0 8th November 2005 06:26
DFI Preps Enthusiast Crossfire Motherboard Sidney WebNews 0 10th September 2005 16:39
DFI LanParty UT nF4 SLI-DR Socket 939 Sidney WebNews 0 30th April 2005 03:14
AMD Cranks Up Speed of Low Power AMD Opteron Chips jmke WebNews 0 23rd March 2005 11:29
DFI LanParty UT nF4 Ultra-D Socket 939 Motherboard Sidney WebNews 0 12th March 2005 21:39
INFO: Explanations of DFI NF3-250GB Bios settings/Ramtimings jmke FAQ / INFO / HOW-TO 2 7th November 2004 03:11

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


All times are GMT +1. The time now is 18:44.


Powered by vBulletin® - Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO