Madshrimps Forum Madness

Madshrimps Forum Madness (https://www.madshrimps.be/vbulletin/)
-   Hardware Overclocking and Case Modding (https://www.madshrimps.be/vbulletin/f10/)
-   -   [WORKLOG] - HD3300 overclocking (https://www.madshrimps.be/vbulletin/f10/worklog-hd3300-overclocking-64000/)

geoffrey 30th May 2009 11:25

Quote:

Originally Posted by Massman (Post 238930)
Can't get to the back of the motherboard since the northbridge cooler isn't fixed to the board. Two of the smaller mosfets read 2.12v (bios: vdimm set at 2.2v) and two measure a bit above 5v.

Okay, then, DDR3, let's set it at 1,8V so there is nothing to get confused with. Then try to map the area with voltage readouts :)

Massman 30th May 2009 11:32

Set DDR2 to 1.8v or? And map what area exactly?

For onboard memory, I already mapped voltage readout points:



They lead to the AS324M IC, which seems to be an amplifier. 8 inputs and 4 outputs:

http://pdf1.alldatasheet.net/datashe...MI/AS324M.html

1 - 4.28v
2 - 4.48v
3 - 2.44v
4 - 10.88v

geoffrey 31st May 2009 14:03

area3

Massman 8th June 2009 17:52

Just slammed the Mach2 GT unit to the NB ... and booting at 1.3GHz core frequency :)

leeghoofd 8th June 2009 18:04

Beat them scores !!!

Massman 8th June 2009 18:05

will not be for today

Massman 14th June 2009 21:33

Just tested with the Mach2 again, there's a small gain, but not in this way it justifies firing up the SS for each bench session. As far as I can see, voltage level is much more important that temperature.

Back to the voltmodding table :)


All times are GMT +1. The time now is 22:55.

Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO