Desert Eagle

@ Kristoff,

it was 182 mhz 5-3-2-2 timings, 2.8 Volt , procc 2401 mhz

agent #2

Max VID for a 3.0e (.09 micron) is 1.4v.
Absolute maximum (non functional voltage--the chip should not receive a clock at this voltage) for these chips is 1.55v.
You exceeded this, so you were definitely asking for trouble. Regardless of the cooling setup....Just because you keep an overvolted CPU cool does not mean that it won't degrade or die.

I've read this on xtremesystems forums. I allready need 1,68 V to boot at 265 FSB. So I think I'm maxed out.

__________________
Rig: E2160 + Xp-120 - GA P35-DS3R - 2*1024 Mushkin PC2 8500 XP - XFX 7800 GT Accelero X1 cooled
For sale: AMD 64 3000+, DFI NF4 Ultra-D, OCZ EL DDR PC3200 PE rev2 (2*512 MB)

kr15t0f

what's your ram, type brand and revision

(btw, I think it's better to make a new thread, because this is agent #2's thread)

kristos

well there's your answer. I'm a bit dissapointed though, I would have expected it to be able to handle more then that withouth stretching your luck. oh well, I'd only go higher for benchmarking then

__________________
"Welcome to the internet; where men are men, women are men, and little girls are FBI agents."

agent #2

Yep. I got a nice superpi score allready. 3d2k1 is above 20k, that's allready nice 2. Now I'm gona try aquamark, 3d2k3 and 3d2k5.

And maybe put some money aside for a new setup.

__________________
Rig: E2160 + Xp-120 - GA P35-DS3R - 2*1024 Mushkin PC2 8500 XP - XFX 7800 GT Accelero X1 cooled
For sale: AMD 64 3000+, DFI NF4 Ultra-D, OCZ EL DDR PC3200 PE rev2 (2*512 MB)