Weird DFI nForce2 infinity + mobile AXP experience
 

133x10= boot
134x10= no boot
133x16= boot

WTF ?

what is wrong with this board?

you tried fsb 166 or 200 ?

i know the feeling, if it has the stock bios flash it as fast as you can

try with the jumper next to the NB off ( 100 fsb cpu ) then go into the BIOS and load optimized defaults, save and power off, put jumper back on and boot

what is your vcore?

tried booting, reset? or booting and reset with insert pressed in

now booting at 8x133 and using clockgen for increasing FSB
works swell

Man, I'm so happy, found this forum & bios while searching for the cause of the no-boot error, came up with this link: http://www.dfi-street.com/forum/show...=&threadid=789

fixed everything & now I can chose whatever Multiplier & FSB setting, this board is great =)

should have flashed it to the latest BIOS right away :bash:

yep, /me :bash:
all is well now :)


SP-97 kicking *** in Socket A HSF roundup, new heatpipe coolers are not match

are you now using one of the dfi-street bioses or are you using the 6-19 official bios?
The clearing of the cmos is EXTREMELY important when using dfi mobo's and also please use winflash 8.30 because it reveals hidden options in bios.
ex-official dfi representative on flashing
please use this method, it will save you a lot of trouble.
Jmke, is this mobo new or do you have it already a bit?

quite new, only have it a few weeks, not used it more then 8-12 hours tops.

I flashed the modded 16/9 bios with the awdflash.exe utility which comes with the official one

that thread you linked is a goldmine also! thanks:)