Watercooling a peltier?

19th January 2006, 03:32

hi, I just bought a Thermaltake Bigwater SE water-cooling kit and wondered if this has enough capacity to cool a 172W
TEC. Any suggestions would be appreciated. Thanks

19th January 2006, 15:08

Dunno if its "powerfull" enough, but you got too keep in mind it has to cool the 172W from your pelt PLUS the heat of your cpu.
So your kooling kit has to be able to be alble to cool 250'ich watt.
For the question if your set is able to do this i would wait for other reply's becouse i have no experience with a kit like yours.
EDIT: I'm afraid a single radiatior is not gonna be able to dispatch the heat.

Greets,
Sharp.

19th January 2006, 15:45

I doubt it'll be able to cool the whole thing (+plus you'll probably need another (bigger) waterblock so that it cover the whole TEC (usualy 50x50 if I'm not mistaking).

260w is mostly used to cool cpu's, so I don't know whether the 172w is going to be good enough for your cpu (if overclocked high).

P.s.
Athlon 64 3200+ venice @ 2.75
small typo is guess

jmke · 19th January 2006, 15:47

2.75 is in Ghz ...

geoffrey · 22nd January 2006, 22:31

Quote:

Originally posted by HardFreak
I doubt it'll be able to cool the whole thing (+plus you'll probably need another (bigger) waterblock so that it cover the whole TEC (usualy 50x50 if I'm not mistaking).

260w is mostly used to cool cpu's, so I don't know whether the 172w is going to be good enough for your cpu (if overclocked high).

P.s.
Athlon 64 3200+ venice @ 2.75
small typo is guess

The 172W will get him under ambient temps, but I don't think it's going to get him below zero degrees Celcius. Not even when idle. Load temps will suck

Keep in mind that 172W off cooling power is the maximum it can do and then it will have 0°c difference between cold side and hot side. Bear in mind that the TEC adds a lot of heat and u will get much higher die-temps then cooling your Atlon with stock heatsink

The less it has to cool, the more power it has for getting temps low. For a good margin he will be better of with a 240W TEC with today's CPU's.

But, if u allready have the watercooling, and u allready have the TEC, why not just try out

Don't forget the 'rulez' of TEC cooling, we don't want u to burn down your house!

jmke · 22nd January 2006, 22:48

http://www.madshrimps.be/?action=hwf...rtme=link_desc

23rd January 2006, 04:46

I've just hooked up the Thermaltake kit using a "resevoir" that is cooled by my mini-fridge. No condensation so far after 5 hours. Temps are:
idle : 63F/17.22C
load : 95F/35C
Cpu is clocked at 2.85ghz
How about a 240w tec now?

jmke · 23rd January 2006, 08:49

Good temps, what voltage are you pushing through the CPU?

geoffrey · 23rd January 2006, 13:38

chilling the TEC with that fridge? Make sure your reservoir is big enough so your water is not going to heat up so quickly. I've done the same, look for me thread somewhere here on madschrimps.

EDIT: found it, here you go -> Top 35 smart people under 35

26th January 2006, 07:07

How about buying a better pump, and adding videocard and chipset waterblocks.
The water is still very cold even after coming off the cpu. If jmke is still watching this thread I am putting ~1.68v depending on how acurate onboard the onboard sensors are. Idle : 58f\16c load : 97f/36c
after getting all of the air out of the lines.
cpu is stable in all applications, including cpu burn-in 1.01, except for prime95.

19th January 2006, 03:32	#1
blakerateliff Posts: n/a	Watercooling a peltier? hi, I just bought a Thermaltake Bigwater SE water-cooling kit and wondered if this has enough capacity to cool a 172W TEC. Any suggestions would be appreciated. Thanks

19th January 2006, 15:47	#4
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,022	2.75 is in Ghz ... __________________

22nd January 2006, 22:48	#6
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,022	http://www.madshrimps.be/?action=hwf...rtme=link_desc __________________

23rd January 2006, 08:49	#8
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,022	Good temps, what voltage are you pushing through the CPU? __________________

23rd January 2006, 13:38	#9
geoffrey [M] Reviewer Join Date: Nov 2004 Posts: 4,127	chilling the TEC with that fridge? Make sure your reservoir is big enough so your water is not going to heat up so quickly. I've done the same, look for me thread somewhere here on madschrimps. EDIT: found it, here you go -> Top 35 smart people under 35 __________________

19th January 2006, 15:08	#2
Sharpside Posts: n/a	Dunno if its "powerfull" enough, but you got too keep in mind it has to cool the 172W from your pelt PLUS the heat of your cpu. So your kooling kit has to be able to be alble to cool 250'ich watt. For the question if your set is able to do this i would wait for other reply's becouse i have no experience with a kit like yours. EDIT: I'm afraid a single radiatior is not gonna be able to dispatch the heat. Greets, Sharp.

19th January 2006, 15:45	#3
wutske Posts: n/a	I doubt it'll be able to cool the whole thing (+plus you'll probably need another (bigger) waterblock so that it cover the whole TEC (usualy 50x50 if I'm not mistaking). 260w is mostly used to cool cpu's, so I don't know whether the 172w is going to be good enough for your cpu (if overclocked high). P.s. Athlon 64 3200+ venice @ 2.75 small typo is guess

23rd January 2006, 04:46	#7
blakerateliff Posts: n/a	I've just hooked up the Thermaltake kit using a "resevoir" that is cooled by my mini-fridge. No condensation so far after 5 hours. Temps are: idle : 63F/17.22C load : 95F/35C Cpu is clocked at 2.85ghz How about a 240w tec now?

26th January 2006, 07:07	#10
blakerateliff Posts: n/a	How about buying a better pump, and adding videocard and chipset waterblocks. The water is still very cold even after coming off the cpu. If jmke is still watching this thread I am putting ~1.68v depending on how acurate onboard the onboard sensors are. Idle : 58f\16c load : 97f/36c after getting all of the air out of the lines. cpu is stable in all applications, including cpu burn-in 1.01, except for prime95.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Swiftech H2O-120 Compact Watercooling KitInbox	Sidney	WebNews	0	6th November 2007 01:49
Danger Den nVidia Watercooling Kit & MAG II-LE Pump	jmke	WebNews	0	11th September 2006 23:15
Gigabyte 3D Galaxy II Watercooling Kit	jmke	WebNews	0	31st August 2006 08:00
Corsair Nautilus 500 Watercooling System	Sidney	WebNews	0	1st May 2006 06:00
Corsair Nautilus500 External Watercooling Kit Announced	jmke	WebNews	0	22nd February 2006 14:40
Innovatek Premium XXS Watercooling Kit	Sidney	WebNews	0	29th October 2005 02:19
Ninja/Shogun with peltier	PotLuck	Hardware Overclocking and Case Modding	8	23rd August 2005 19:45
Evercool's WC-202 watercooling kit is awesome after some personal modding!	Sttomcat3	Hardware Overclocking and Case Modding	0	23rd February 2005 07:54
From Air to Watercooling Guide @ msfn	jmke	WebNews	0	18th May 2004 23:31
Koolance Exos Watercooling	jmke	Articles & Howto's	21	16th November 2003 21:52