Teemto's bench log - Page 17

Teemto · 7th October 2011, 06:42

Actually I'm running at 100.5 but never had problems with other cards.
Anyhow I'll give it a shot at 100 tonight. Hope that's the problem, less work than reflashing the cards

Both cards have the reference design, but the MSI is an OC card.

Teemto · 8th October 2011, 13:03

PCI-E @ 100 is still a no go.
Will try to flash one of the cards with an ASUS bios.

* ASUS HD5450 DDR2: 12.5 points, 5 Gold cups, 1 Silver Cup, 5 Bronze cups

Teemto · 10th October 2011, 06:59

Krijg winflash niet aan de praat op m'n Win7 systeem.
Via dos bootdisk moet ik een force flash doen wegens de andere vendor code.
Ga het toch maar op safe spelen en wachten tot de FX-8170 uit is, dan test ik ze daar wel op.

Teemto · 11th October 2011, 21:12

Zou het kunnen dat deze versie van de X1300 nog niet in de lijst staat?

Volgens GPU-Z 0.5.4

Name: Radeon X1300/X1500 series
GPU: RV515
Technology: 90 nm
Device ID: 1002-7146
Subvendor: ATI(1002)
Shaders: 4pixel/2vertex
Memory type DDR2
Memory size: 256MB
Bus width: 64 bit
Bandwith: 4.3GB/s

Default clocks: 450/250MHz

Ik dacht eerst dat het de gewone : Radeon X1300 256MB was maar die heeft volgens screenshots van andere entries een 128 Bit bus.

Kaartje heeft als P/N 102A7710111 000092

Teemto · 22nd October 2011, 10:52

New 5.6 CPU for bench setup.
First card to be re-tested is the 9600GT. This one had a fan that was not working at full power anymore. Swapped it for a Thermalright Shaman (takes up 4 slots

).

* 9600GT re-test: 109.6 points; 1 Gold cup ---> +18 points

Gamer · 22nd October 2011, 18:50

26 submissions in a day, the man is on a mission !!!

leeghoofd · 22nd October 2011, 20:26

He's on fire it seems, but :

- Don't forget to make correct screenshots (those will be reported for sure)...

- You have some scores with EIST and co enabled, loosing performance there Pascal

-Superpi 32M score is totally out of bounce, no idea what happened there : around 6 mins is okayish, 6 min 32secs is not good

Teemto · 22nd October 2011, 21:00

It's actually less than 26 as some scores I had to upload again before they gave a score.

Which ones have wrong screenshots?

Yep something weird going on with Superpi32M it's worse than my 5.3 score?!

EIST is enabled but C1E state disabled. Without EiST enabled I can't modify the Multi with TurboEVO.

Teemto · 23rd October 2011, 17:37

Managed to squeze out a bit more performance in SuperPi1M and Wprime32M

Stable settings are:

5600=56x100 @1.56V DDR3-2133 8/10/8/24/1T
5610=55x102 @1.56V DDR3-2175 8/10/8/26/1T
5640=55x102.5 @1.56V DDR3-1913 7/9/7/24/1T

5640ish is as high as she goes. Beyond that I'll need more cooling

Soon that won't be a problem anymore

Muhhahahhahhah

* 7950GT re-test: 30.7 (+5) older card doesn't benefit that much from the faster CPU.

Teemto · 25th October 2011, 23:23

* GTX295 re-test: 62.8 (+35) Nice improvement, but could have been better with a single PCB GTX295, as this dual PCB version gets quite hot.

* 8500GT test: 4.1 ; 1 Silver cup. Really crappy card (version without SLI connector). Did a quick Vmod with my SMD grabbers and a 20k var resistor.
But the higher clocks were only sustainable in AM3. In the others the card ran too hot. Couldn't mount the Shaman as some of the Caps were in the way of the heatpipes. Maybe later phase test candidate

Still got a 6600GT and 8600GTS coming in from Ebay.

7th October 2011, 06:42	#161
Teemto Member Join Date: May 2007 Location: Duffel Posts: 542	Actually I'm running at 100.5 but never had problems with other cards. Anyhow I'll give it a shot at 100 tonight. Hope that's the problem, less work than reflashing the cards Both cards have the reference design, but the MSI is an OC card. __________________ 1999 First home made PC: Celeron 500 * Abit BE6 * Diamond Viper v770 32MB Quantum Fireball KA 18GB ATA-66 64MB SDRAM * Philips 107SX 17" * 50x CD-ROM * Win98

8th October 2011, 13:03	#162
Teemto Member Join Date: May 2007 Location: Duffel Posts: 542	PCI-E @ 100 is still a no go. Will try to flash one of the cards with an ASUS bios. * ASUS HD5450 DDR2: 12.5 points, 5 Gold cups, 1 Silver Cup, 5 Bronze cups __________________ 1999 First home made PC: Celeron 500 * Abit BE6 * Diamond Viper v770 32MB Quantum Fireball KA 18GB ATA-66 64MB SDRAM * Philips 107SX 17" * 50x CD-ROM * Win98

10th October 2011, 06:59	#163
Teemto Member Join Date: May 2007 Location: Duffel Posts: 542	Krijg winflash niet aan de praat op m'n Win7 systeem. Via dos bootdisk moet ik een force flash doen wegens de andere vendor code. Ga het toch maar op safe spelen en wachten tot de FX-8170 uit is, dan test ik ze daar wel op. __________________ 1999 First home made PC: Celeron 500 * Abit BE6 * Diamond Viper v770 32MB Quantum Fireball KA 18GB ATA-66 64MB SDRAM * Philips 107SX 17" * 50x CD-ROM * Win98

11th October 2011, 21:12	#164
Teemto Member Join Date: May 2007 Location: Duffel Posts: 542	Zou het kunnen dat deze versie van de X1300 nog niet in de lijst staat? Volgens GPU-Z 0.5.4 Name: Radeon X1300/X1500 series GPU: RV515 Technology: 90 nm Device ID: 1002-7146 Subvendor: ATI(1002) Shaders: 4pixel/2vertex Memory type DDR2 Memory size: 256MB Bus width: 64 bit Bandwith: 4.3GB/s Default clocks: 450/250MHz Ik dacht eerst dat het de gewone : Radeon X1300 256MB was maar die heeft volgens screenshots van andere entries een 128 Bit bus. Kaartje heeft als P/N 102A7710111 000092 Attached Thumbnails __________________ 1999 First home made PC: Celeron 500 * Abit BE6 * Diamond Viper v770 32MB Quantum Fireball KA 18GB ATA-66 64MB SDRAM * Philips 107SX 17" * 50x CD-ROM * Win98

22nd October 2011, 10:52	#165
Teemto Member Join Date: May 2007 Location: Duffel Posts: 542	New 5.6 CPU for bench setup. First card to be re-tested is the 9600GT. This one had a fan that was not working at full power anymore. Swapped it for a Thermalright Shaman (takes up 4 slots ). * 9600GT re-test: 109.6 points; 1 Gold cup ---> +18 points __________________ 1999 First home made PC: Celeron 500 * Abit BE6 * Diamond Viper v770 32MB Quantum Fireball KA 18GB ATA-66 64MB SDRAM * Philips 107SX 17" * 50x CD-ROM * Win98 Last edited by Teemto : 22nd October 2011 at 12:38.

22nd October 2011, 18:50	#166
Gamer [M] Reviewer Join Date: May 2002 Posts: 4,587	26 submissions in a day, the man is on a mission !!! __________________

22nd October 2011, 20:26	#167
leeghoofd [M] Reviewer Join Date: Dec 2008 Posts: 3,209	He's on fire it seems, but : - Don't forget to make correct screenshots (those will be reported for sure)... - You have some scores with EIST and co enabled, loosing performance there Pascal -Superpi 32M score is totally out of bounce, no idea what happened there : around 6 mins is okayish, 6 min 32secs is not good __________________

22nd October 2011, 21:00	#168
Teemto Member Join Date: May 2007 Location: Duffel Posts: 542	It's actually less than 26 as some scores I had to upload again before they gave a score. Which ones have wrong screenshots? Yep something weird going on with Superpi32M it's worse than my 5.3 score?! EIST is enabled but C1E state disabled. Without EiST enabled I can't modify the Multi with TurboEVO. __________________ 1999 First home made PC: Celeron 500 * Abit BE6 * Diamond Viper v770 32MB Quantum Fireball KA 18GB ATA-66 64MB SDRAM * Philips 107SX 17" * 50x CD-ROM * Win98

23rd October 2011, 17:37	#169
Teemto Member Join Date: May 2007 Location: Duffel Posts: 542	Managed to squeze out a bit more performance in SuperPi1M and Wprime32M Stable settings are: 5600=56x100 @1.56V DDR3-2133 8/10/8/24/1T 5610=55x102 @1.56V DDR3-2175 8/10/8/26/1T 5640=55x102.5 @1.56V DDR3-1913 7/9/7/24/1T 5640ish is as high as she goes. Beyond that I'll need more cooling Soon that won't be a problem anymore Muhhahahhahhah * 7950GT re-test: 30.7 (+5) older card doesn't benefit that much from the faster CPU. __________________ 1999 First home made PC: Celeron 500 * Abit BE6 * Diamond Viper v770 32MB Quantum Fireball KA 18GB ATA-66 64MB SDRAM * Philips 107SX 17" * 50x CD-ROM * Win98 Last edited by Teemto : 23rd October 2011 at 17:44.

25th October 2011, 23:23	#170
Teemto Member Join Date: May 2007 Location: Duffel Posts: 542	* GTX295 re-test: 62.8 (+35) Nice improvement, but could have been better with a single PCB GTX295, as this dual PCB version gets quite hot. * 8500GT test: 4.1 ; 1 Silver cup. Really crappy card (version without SLI connector). Did a quick Vmod with my SMD grabbers and a 20k var resistor. But the higher clocks were only sustainable in AM3. In the others the card ran too hot. Couldn't mount the Shaman as some of the Caps were in the way of the heatpipes. Maybe later phase test candidate Still got a 6600GT and 8600GTS coming in from Ebay. __________________ 1999 First home made PC: Celeron 500 * Abit BE6 * Diamond Viper v770 32MB Quantum Fireball KA 18GB ATA-66 64MB SDRAM * Philips 107SX 17" * 50x CD-ROM * Win98

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gamer's Bench log.	Gamer	Hardware Overclocking and Case Modding	82	21st October 2011 08:23
Lian Li PC-T60 Test Bench	jmke	WebNews	0	21st December 2010 09:42
Lian Li PC-T7B Mini-ITX Test Bench	jmke	WebNews	0	21st September 2010 07:59
Dimastech Easy Test Bench v2.5 Tested	jmke	WebNews	0	30th May 2010 16:32
Lian-Li Goes Test Bench Crazy With PC-T60 & PCT7	jmke	WebNews	0	29th April 2010 07:32
Lian Li Launches PITSTOP PC-T1 Mini-ITX Spider Test Bench	jmke	WebNews	0	17th April 2010 11:39
DimasTech Bench Table Easy V2	jmke	WebNews	0	20th April 2009 15:15
HSPC Tech Station PC Test Bench	jmke	WebNews	0	17th February 2006 23:06