OC Barton 2500+ Need advise Just started trying to OC my Barton 2500+ for the first time. My specs are: Processor: AMD XP 2500+ Cooling: Zalman Copper Flower (CNPS6000-CU) (Total of 2 fans and 1 heatsink) Motherboard: Gigabyte GA-7N400 (NFORCE2) RAM: 256MB 333MHZ (I know this is ****, getting more soon!) I built this system from scratch but am needing the experts advise to OC :ws: My system normally runs at temperatures 38-40C I've tried pushing up the cpu freq from 11 to 12 but when i exit bios the system just hangs. I always save on exit from bios. but when it restarts it dosen't even start bios again, and there is no picture onscreen. When i press the restart button it starts perfect but resets my original bios settings. how do i get this sorted. its probably a simple mistake i'm making. Thanks for ur time Mak |
if this is a recent barton, it will be probably locked, and not possible t ounlock... |
try to run ram @ 166 mhz and cpu @ 200 mhz |
Just did what u said bonbon. seems to be stable enough temp has risen to about 47-49C Temp. is that ok? what should i do to oc it even more? Thanks Again Mak |
I woudn't go any much further with those temps , the zalman isn't suposed to be an overclocker Stresstest your system 24 or 48 hours also hé? Prime95 + 3dmark = pretty stressfull what is the Vcore atm ? checked the temps in your bios? If your system is silent , than the overall is nice , and i would keep it this way . |
Managed to squeeze FSB Freq up to 205. Tried 210 but no boot. Temp seems to even out at 45C now. Temp last night was 49C but the room must have been very hot. Are there any fans/heatsinks you would recommend to reduce the temp? Thanks yet again Mak |
Thermalright SLK800/947 is you have some $$$ to spare |
Thanks for the advise. I might get it depending on how genourous Father Christmas is (aka my girlfriend). Also checked out ur website jmke. U must have ur own power station to fuel those PC's. plus u have over 1000 gibabytes of storage. And i thourght i had alot with 80 GB's! Mak |
What is locked on the lastest barton? Multiplayer or FSB or both? |
A : multiplier. fsb is never locked on the cpu |
All times are GMT +1. The time now is 01:41. |
Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO