New GSKILL PC3200 1GB GH with Winbond UTT (BH5) is here!

8th April 2005, 22:54

Got some great stuff! Winbond is back and will be available in large scales

Here is some juice of the GSKILL PC3200 1GB GH with Handpicked Winbond UTT (BH5) chips.

Here a closer look:

As you can see, Typical Winbond with the two markings.
These are relabled Winbond UTT.

GSKILL rated these modules at 2-2-2-5 400Mhz @2.5~2.6v.

Some results and offcourse OC:

This memory ran fine at stock speed and timings at 2.5v.
240MHz 2-2-2-5 I only need 3.1v to get it stable.

250MHz 2-2-2-5 ran memtest stable at 3.26v:

260MHz 2-2-2-5

270MHz 2-2-2-5

jort · 8th April 2005, 22:57

nice speeds kakaroto,

did you got 270mhz with active cooling or what?

is 270 the absolute max you can get?

8th April 2005, 22:58

It seems the wall of these kind of memory is around 270MHz.
I think better ones will do 270MHz stable.
I need 3.7v for 270MHz.

Offcourse with some little airflow.

9th April 2005, 01:16

These sure did looked promessing all the way up to 250MHz, outclassing VX big time. too bad they scale differently, needing ~0.2V for every 10MHz fsb where as VX tends to need only ~0.1V for every 10MHz.

270MHz isn't much better if better at all then vx eather, I was kinda hoping for 280-290MHz at ~3.8Vdimm stable

12th May 2005, 22:22

Maybe the new mushkin redline will do it. It's now available in belguim at bytesatwork.be . I'm very excited to see some people push it to the limit and post their results. I think this is the best memory with utt chips. I'm also waiting to see the first impressions on the gskill pc4000 with utt chips. I think this two will battle for the leadership.

8th April 2005, 22:54	#1
Kakaroto Posts: n/a	New GSKILL PC3200 1GB GH with Winbond UTT (BH5) is here! Got some great stuff! Winbond is back and will be available in large scales Here is some juice of the GSKILL PC3200 1GB GH with Handpicked Winbond UTT (BH5) chips. Here a closer look: As you can see, Typical Winbond with the two markings. These are relabled Winbond UTT. GSKILL rated these modules at 2-2-2-5 400Mhz @2.5~2.6v. Some results and offcourse OC: This memory ran fine at stock speed and timings at 2.5v. 240MHz 2-2-2-5 I only need 3.1v to get it stable. 250MHz 2-2-2-5 ran memtest stable at 3.26v: 260MHz 2-2-2-5 270MHz 2-2-2-5

8th April 2005, 22:57	#2
jort Member Join Date: Jun 2004 Location: mechelen(belgium) Posts: 2,037	nice speeds kakaroto, did you got 270mhz with active cooling or what? is 270 the absolute max you can get? __________________ watercooling, chilled water,direct phase change, cascade, custom modding

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[TK] DDR 1GB G.Skill Winbond UTT (2-2-2-5 @ 255Mhz)	Violator	Mad Bargains	2	16th November 2006 07:48
GeIL ONE Winbond BH5 1GB Dual Channel Kit	jmke	WebNews	0	21st November 2005 20:29
Crucial Ballistix 1GB PC3200 DDR Dual Channel Memory	jmke	WebNews	0	12th October 2005 16:11
Rebuild the Winbond honor -GSkill 1GBGH simple test	windwithme	Hardware Overclocking and Case Modding	6	1st September 2005 13:47
INFO: List of RAM with Winbond UTT chips	jmke	FAQ / INFO / HOW-TO	2	29th May 2005 17:16
OCZ PC3200 Gold Edition (BH5) DDR	Sidney	WebNews	0	20th May 2005 03:17
GeIL Ultra-X PC3200 Winbond BH5 1GB	Sidney	WebNews	0	3rd May 2005 05:47
OCZ Gold PC3200 1GB Dual Channel Kit	Sidney	WebNews	0	29th April 2005 15:38
INFO: RAM List: What Chips on what Memory	jmke	FAQ / INFO / HOW-TO	3	23rd April 2005 17:13
Winbond returns - TwinMos PC3200 with "Winbond UTT"	jmke	WebNews	0	20th January 2005 14:18

8th April 2005, 22:58	#3
Kakaroto Posts: n/a	It seems the wall of these kind of memory is around 270MHz. I think better ones will do 270MHz stable. I need 3.7v for 270MHz. Offcourse with some little airflow.

9th April 2005, 01:16	#4
kristos Posts: n/a	These sure did looked promessing all the way up to 250MHz, outclassing VX big time. too bad they scale differently, needing ~0.2V for every 10MHz fsb where as VX tends to need only ~0.1V for every 10MHz. 270MHz isn't much better if better at all then vx eather, I was kinda hoping for 280-290MHz at ~3.8Vdimm stable

12th May 2005, 22:22	#5
@erox Posts: n/a	Maybe the new mushkin redline will do it. It's now available in belguim at bytesatwork.be . I'm very excited to see some people push it to the limit and post their results. I think this is the best memory with utt chips. I'm also waiting to see the first impressions on the gskill pc4000 with utt chips. I think this two will battle for the leadership.