Madshrimps Forum Madness - mobo can't get passed 250fsb with ram 1:1

Page 3 of 3

Show 40 post(s) from this thread on one page

Madshrimps Forum Madness (https://www.madshrimps.be/vbulletin/)

- Hardware Overclocking and Case Modding (https://www.madshrimps.be/vbulletin/f10/)

- - mobo can't get passed 250fsb with ram 1:1 (https://www.madshrimps.be/vbulletin/f10/mobo-can-t-get-passed-250fsb-ram-1-1-a-9681/)

jmke	5th November 2004 17:12

APIC ON = ACPI Uniprocessor PC
ACPI on = ACPI PC
ACPI off soft = Standard PC

kr15t0f

5th November 2004 17:14

255 fsb with 1 stick of ram at 3.28V
2-2-2-11

good result? Maybe give some more voltage to my mem???

kr15t0f

5th November 2004 17:16

Quote:

Originally posted by jmke
APIC ON = ACPI Uniprocessor PC
ACPI on = ACPI PC
ACPI off soft = Standard PC

So I have to put APIC off in bios, and then do the thing da_boka quoted?

jmke	5th November 2004 17:37

disabling APIC will hurt performance, check the thread I linked in my post(s) above

kr15t0f

5th November 2004 17:40

Quote:

Originally posted by jmke
disabling APIC will hurt performance, check the thread I linked in my post(s) above

1) so leave APIC ON
2) set to standaard pc in device manager
3) instal win xp with acpi off.

think I got it right this time

Da_BoKa

6th November 2004 08:11

Quote:

Originally posted by jmke
disabling APIC will hurt performance, check the thread I linked in my post(s) above

yes it will hurt your performance a bit but it will raise your fsb, you have to test it touroughly ( with or without acpi on and the performance gain ).

And yes it's possible that the gain of fsb is so little that you will lose performance.

Trail and error ;)

All times are GMT +1. The time now is 12:21.

Page 3 of 3

Show 40 post(s) from this thread on one page