EVGA Classified E762 testing. 1 Attachment(s) BCLK 215 is ok, higher isn't. Must look in to it. |
other bios ;). |
Yeah, you have it ? |
Testing BCLK 226 for now, working ok with 3D mark. |
228. |
Mechanisch, niet elektrisch |
1 Attachment(s) |
u suck monkeyb*lls, stock hs here single 55°C load 1.26vgpu 100% fan though :p. |
I've noticed this HS attached easely, no pressure needed. That could be the problem. |
msi afterburner is really nice tool :). sofar my benching with 5870 for now, back to 4ghz cpu and stock gpu for 24/7 :). |
Oh, you have a 5870 I could use for 4x ? :) |
|
Did you flash it already, or is it an ASUS ? |
Quote:
so voltage upto 1.35vgpu with afterburner, maybe tomorrow some more testing on both cpu en gpu ;). 4.5ghz with wc should be doable , also 1050core is a go i think. P20k vantage on air is a goal so far. edit some have the wurst effeciety in 03 @ hwbot :D. i think i can hit 95k+ with this setup though will try tomorrow. |
20K on vantage with one card should be easy, I had 20600 already on 4 ghz i7. |
Quote:
u need 4.4ghz +1030mhz core for P20k+ ;), or 4.2ghz and 1100mhz+ core . sure u had only one card running :D. |
You need to change fan and fluid colour now Blind, this is Blasphemy !! RED is the way to go now !! Hook it up to the Phase Luc... I'm keeping my fingers crossed for +235Bclock... |
Recieved the new bios from Shamino with gulftownsupport, it's worse than the original. Forgot to save the E bios, and can't find it back :( |
EPIC FAIL ! I'll pm Andre :p |
Quote:
I'm in.............:D Hey gamer, that bios just is for gulftown super pi. Gulftown is slower than i7 on pi cos gulftown has lower uncore on intel's spec. EVGA BIOS RD change gulftown uncore to i7 spec, but this must against intel's spec. Maybe it will effect i7 is hard to overclock. If you want to oc i7, I suggest you just use normal bios for i7. |
Yeah, I've noticed. That E Bios was great, maybe you still have it ? |
Quote:
I think I have old bios |
|
235 BCLK on phase : check. 240 isn't possible. But I'm happy with 23x235 :) |
Can't get that 4 way to post at all... shutsdown at error code 69... Init Cache, have reseated and tried all rams, different PSU, removed CPU and reseated it, remounted the TRUE Trice... still the same... |
Ehm, with the 3540 cpu ? |
sadly yes, plus your rams... seems the 3rd dimm socket is inoperative... even if I put my corsairs on the mobo it just doesn't post, 2 dimms okay, 3 not... |
What if you exchange the cpu? |
socket pin doesn't have good contact with your cpu. Re-install your cpu. |
Could be, had some troubles already with that board. FF code and so. |
evga mobo doesn't like Belgian.:D ok...start to see new 4-way mobo next week.:-p |
Quote:
|
Quote:
|
So it must be Asrock :) |
Asus, I think |
Quote:
been running the rex2 here and its just a pleseu oc'ing it :D. |
All times are GMT +1. The time now is 03:21. |
Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO