E5200 wolfdale R0 test 4 Attachment(s) Hi folks, Since i decided to start again with overclocking i thought it was time to test some stuff in my daily internet/gaming rig. Just to get the feeling again before i actualy go out and buy stuff. Iv'e been out for almost 2 years now so don't expect anything at all :) cause what amazes me can bore you :D Specs : Intel E5200 A334 2.5Ghz 12.5X200 2Mb L2 cache Gigabyte EG31MF-S2 2X2GB Kingston value at 5-5-5-22 Sparkle Geforce 9800Gt 1GB 600/1500/900 Antec 550W earthwatts Initial test : Speed passing at 4ghz start frequency at boot Air cooled 4.0Ghz 12.5*320 1.55V set bios 1.5V real mems at 480Mhz 5-5-7-22 2.0V Vga at 655/1615/975 Superpi 1M : 14.031sec Aquamark 03 : 180235 3dMark03 : 39892 3dmark2001 : 54512 to be updated, looking for tests to be run, downloading software . If anybody can help me with a working clockgen, that would be awesome! |
1 Attachment(s) |
Yes it should be one of those 2, and how does it work now? I simply find a file to add to clockgen? Confused? Thx for the input! *edit* nevermind massie! It seems 2 years is already a longtime, didn't even knew i was using SetFsb in those days instead of clockgen. RTM875-857 is my pll Going to see how far this cpu will go on this budget board in SP1M to start with. Again thx for your input! |
1 Attachment(s) |
1 Attachment(s) I don't think this board is classified to test fsb properly. Right now i pushed him to 4200mhz 336*12.5 with rams at 2/3 504Mhz At 4225 i get not exact in round message at superpi, now i don't no anymore wheter this is cpu or mem related. Tomorow i will drop the multi and test for fsb :-) For now i have to say this cpu pleases me. Wonder how it will do underneath LN2 ^^ |
It will do the average of this: http://hwbot.org/hardware/processor/core_2_e5200_2.5ghz http://hwbot.org/hardware/chipset/g31 Seems like 500+ FSB on G31 is not impossible |
Quote:
But the chip has potential no? You got a good S775 laying around taking dust?:naughty::D |
No, I had to lend gear as well ... ^^ |
Quote:
|
No, I just sold it because it's too slow for me |D. Turns out the E8600 I sold is pretty decent ... :-/ |
All times are GMT +1. The time now is 10:29. |
Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO