cant get fsb over 200???
 

ok, i jus got my new abit board in.....and i still cant get my fsb over 200, im using ocz pc3200 1gb platinum....not the revision 2, the old revision 2-3-2-5 timings. ive raised the mem voltage, chipset voltage, im using a mobile 2500 chip, nf7-s mobo rev2. i cant use the 12.5 multi anymore, but 12 and 13 are safe. my mem shoudl be able to hit 220 with the stock timings, i have tried to loosen the timings. any ideas??? cuz im stumped

tried with lower multi already?

as low as 10

I know this is an oldie but ssl I have a very similar setup to you and have had the same problems (abit nf7-s, athlon-m 2500+, corsair ram, 450w antec psu). I've got a new antec 450w psu that provides enough juice, new xp athlon-m 2500+, low cpu temps, good memory, but i still can't get past 200fsb (can get to 202 but thats absolute max). The 2500+ is on 1.775v so I don't have much more headway. Have you had any luck?

no luck yet, im gonna try overclocking it from windows with the nvidia sys utility, gonna set my multi to 11, and voltage to 1.9 in the bios, and see how i can get it in windows, and prime it while im slowly movin it up...if it goes up at all

Same board you have NF7-S R2. XP2600+ M 12x200; 11x215 @1.650 Volt; 12.5x200 @1.775 Volt.

I am running it about 16 hours day 12x200.

Sys 2 NF7 XP1700+ 10.5x200 @1.775 using PC2700.

May be your BIOS setup.

Have eather of you tried the l12 mod on your mobiles yet?

I've never had the problem with mine but HaLDoL told me he once had a mobile that wouldn't do 200 fsb no matter what he tried. He did an l12 mod on it and it went straight to ~240 fsb without braking a sweat.

i tried the L12. my system wont power on with it.....maybe i did it wrong

more then likely;)

bah, ill try it again later, for now i gotta get around to tryin nvsys utility