 |  |  |  |  |
amd 3000 problem
| |||||||||
|
amd 3000 problem
| | |||||||
 |
 |
| | Thread Tools |
27th October 2005, 14:01
| #11 |
| Madshrimp  Join Date: May 2002 Location: 7090/Belgium
Posts: 79,021
 |  If you want to get the most out of your CPU, you'll have better luck with overclocking a DFI board
__________________  |
|
|
27th October 2005, 15:33
| #12 |
|
Posts: n/a
| what kind would you suggest.I wasnt looking to spend over 200 cause i also need ram.i saw some nice stuff from corsair.quote:At nearly 438MHz, the new Corsair 3500LL PRO is the first to address the need for high memory density at extremely low latency.the XMS-3500LL PRO is optimized to unleash more AMD based system performance than the competition.2-3-2-6 1t. |
|
27th October 2005, 16:22
| #13 |
| Madshrimp Join Date: May 2002 Location: 7090/Belgium
Posts: 79,021
| try to get memory with Samsung TCCD chips, able to do CL2 2-2-5 1T at 200-210Mhz, that's enough you need to OC nForce4 SLI from DFI will be fine also, unless you like to "mod" a bit, than the none-SLI nForce4 from DFI is an option also as it can be modified to SLI capabilities (search Anandtech for their article)
__________________ |
|
|
|
27th October 2005, 16:38
| #14 |
|
Posts: n/a
| thanx.for the info and thanx for this forum i finally got my graffix problem fixed.theres only one thing i still dont know.how do i change the ltd multiplier like jort said.i know go ahead laugh it up its ok. |
|
27th October 2005, 17:02
| #15 |
| Madshrimp Join Date: May 2002 Location: 7090/Belgium
Posts: 79,021
| do you have the manual that came with your board? it should contain a BIOS config portion, if you don't find HTT/LDT multiplier setting in there, than most likely your motherboard's BIOS does not support/allow it.
__________________ |
|
|
|
27th October 2005, 17:19
| #16 |
|
Posts: n/a
| only thing i could find something like that is cpu ratio i can set that anywhere from "startup-default and x4 at 800 all the way up to x20 at 4000 but it wont let me go past x9 at 1800.so i just left it at startup and changed cpu frequency from 200 to now at 245 which gave me 2.2 gig |
|
27th October 2005, 22:05
| #17 |
| Madshrimp Join Date: May 2002 Location: 7090/Belgium
Posts: 79,021
| nope, that's the multiplier of the CPU  seems you don't have the needed tweaks to run high HTT/FSB speeds on your board
__________________ |
|
|
|
28th October 2005, 04:15
| #18 |
|
Posts: n/a
| OCZ PC4200 DDR 533MHZ 2048MB 2GB 4x512MB is this stuff good.my friend has it and said hell give it to me for 250.2 gigs is worth it but with having all 4 dimms plugged up wont that cause problems.the timing is like this 533Mhz CL 3-4-4-8.thanx |
|
28th October 2005, 04:16
| #19 |
|
Posts: n/a
| yes its dual channel |
|
28th October 2005, 04:34
| #20 |
| Member  Join Date: Mar 2004
Posts: 15,738
 | With 4x512, you will have to set 2T in CPC, and with 3-4-4-8 timing you will only slow down your system. Your question has been answered as Jmke outlined. Do what you want, it is your system You don't need water cooling for your system;money saved could be invested on a good vcard; still have money left, go for low latency memory or a good motherboard. That is our recommendation.
__________________ lazyman Opteron 165 (2) @2.85 1.42 vcore AMD Stock HSF + Chill Vent II |
|
|
|
| Thread Tools | |
| |
