Follow us on Twitter
Follow us on FacebookPolarFLO TT Series Waterblock
@ 2004/10/20One very important note - I tested the PolarFLO TT on a socket A / 462
board (not officially supported by PolarFLO) - so I had to drill 4 new
mounting screw holes in the mounting plate to mount the block on the
motherboard (Editors note; This can also be accomplished by a custom
clip mechanism). So basically, we are going to be looking at the
performance of this block on a different platform than the block was
designed for. Needless to say, PolarFLO gave us their blessing and
wanted us to publish this article (maybe for this exact reason). Of
course, I would not urge others to do this experiment - use the block
for the intended platforms!
board (not officially supported by PolarFLO) - so I had to drill 4 new
mounting screw holes in the mounting plate to mount the block on the
motherboard (Editors note; This can also be accomplished by a custom
clip mechanism). So basically, we are going to be looking at the
performance of this block on a different platform than the block was
designed for. Needless to say, PolarFLO gave us their blessing and
wanted us to publish this article (maybe for this exact reason). Of
course, I would not urge others to do this experiment - use the block
for the intended platforms!
