- Back to homepage

Overclocking the G0 SLACR Q6600 to 4GHz

@ 2007/08/19

Who doesn’t love a highly overclockable CPU? There isn’t many of us! Every once in a while we'll hear of a golden CPU from someone, this has been going on since the good ole' Celeron 300A days when 450MHz was a walk in the park. As time has gone on there’s been golden Athlons and Intel processors.

The latest processor to join the ranks of this highly competitive field is the Q6600 in the G0 form. With a lower stock voltage compared to the B3 stepping, along with a huge test field it seems clear that the G0 is a real winner.

Comment from jmke @ 2007/08/19

same doesn't apply to GFX cards!! recent games need new GPU to run, simple as that.

If single core CPU goes to 5Ghz it will not push performance that much higher, as bottleneck is no longer memory bandwidth, raw CPU power, but disk transfer speed and VGA (for games).

if you want a seriously noticeable performance boost, install a RAM drive which gives you 2000MB/S at least read/write speeds, games loading times will again be limited to CPU power

Comment from Sidney @ 2007/08/19

Bottom line is if you cannot up the speed on today's processors, multi-core is simply a marketing scheme.

The same applies to graphic card, unless everyone owns a 30" screen. However, it will get most enthusiasts excited.

For 3D workstation, it does have the merit. Then, heavy 3D drawings are limited by memory size constraint and 64-bit OS is not widely supported.

Comment from The Senile Doctor @ 2007/08/19

Quote:

Originally Posted by jmke

The Q6600 is nowhere near Celeron 300A area, when you overclocked the 300A you actually noticed an improved performance for your PC, the Q6600 running at stock or 4ghz... no difference in majority of apps and games.

perfectly true...

Comment from thorgal @ 2007/08/19

Quote:

Originally Posted by Rutar

and, 1.66V =P

Yeah indead, this is not what I'd call a stable overclock. Anyway, I guess some of the G0 Q6600's do clock ok

Comment from Kougar @ 2007/08/19

Dunno. But if you want an idea... ~350watts is my usual load figure with a stock 8800GTS. After overclocking the Q6600 I am seeing a peak of ~460watts at 3.8Ghz + 1.46v. Clock speed raises the power draw + temps more than raising the volts will, interestingly.

Comment from Rutar @ 2007/08/19

How much of those 640W can be accounted to the HD2900s?

and, 1.66V =P

Comment from jmke @ 2007/08/19

All information and graphics contained in Madshrimps are sole property of the Madshrimps crew and may not be reproduced or copied in any manner without written permission from us.