KingSpec 2.5 GB/s PCIe SSD Detailed

@ 2013/09/04
In the swarming SSD market, what better way to blast your way from obscurity to worldwide attention, than launching a ludicrously fast SSD? KingSpec unveiled the MC2J677M1T, a PCI-Express SSD that's tested to be capable of sequential speeds as high as 2.5 GB/s (gigabytes per second). Pictured below, the drive is an almost full-height add-on card with PCI-Express 2.0 x8 bus interface. The card seats a high performance SATA 6 Gb/s RAID controller by LSI (under that fan-heatsink), which is wired to eight mSATA 6 Gb/s ports, holding the eight sub-units.

The eight mSATA SSD sub-units on the MC2J677M1T each hold 120 GB of data (totaling 960 GB). Each sub-unit runs a JMicron-made controller, Intel-made MLC NAND flash, and Nanya-made DRAM cache. The LSI RAID controller is designed to be plug-and-play, i.e., the drive is bootable, and you won't need an F6 driver during Windows installation to detect the drive. A quick ATTO benchmark run by TheSSDReview, which has one of these drives, yielded sequential read speeds well past 2,500 MB/s.

No comments available.

 

reply