Introduction

You must admit, when USB first set foot upon earth there was not anyone thinking about how much more possibilities men really had created. You can't get around it nowadays and the list of USB compatible devices seem to be endless. USB fans, heaters, memory sticks, floppy drives, keypads, mice, printers, license keys, sound cards, ... and HDD enclosures off course! The comfort of having a fast and easy connectible but yet good looking solution to backup most of your precious computer data and pictures has now become reality, though the competition is on and the question "what to choose?" becomes asked more frequently day by day. Today we're having a look at the Vizo Luxon Advanced LXE-350 HDD enclosure for 3,5" IDE/SATA hard drives, have a look at the product sample we received:



The LXE-350 is at the moment of writing no longer the newest Luxon HDD enclosure, that doesn't mean you should ignore it of course. Round etches and high gloss polish gives the Luxon its slick looks which doesn't really jump into the eye, modern side drawings make it perfect to integrate in nowadays designed offices and living rooms, but its appearance is good for all-round users too.



The body is made of aluminum and is absolutely light weight, and small compared to some other HDD enclosures which makes it easier to carry. Aluminum means low heat resistance and thus cooler running hard drives which excels the lifetime of the drive. The LXE-350 comes with an aluminum stand with soft rubber feet to keep the drive at the right place inside the Al-stand, unfortunately these rubbers aren't attached to strong and after few times in- and uninstalling the drive into the stand I seem to have lost one of the four rubbers making the HDD enclosure body vulnerable for scratches. The HDD activity indicator is large and easy to spot, on the picture below you see it lightened when the enclosure power is present. Accessing the external drive will make the indicator light up in purple as there have been 2 LEDs build in. The body is hold together with nothing more then the four small screws you see on these pictures, after removing them you'll be able to pull out the grey body where another 4 screws are used to tighten the hard disc. All together installing the hard drive goes absolutely fast but does not always seem too steady, probable because of its light weight I presume.



Inside you'll spot a IDE/SATA converter chip... yes, that's right, both interfaces are supported by the Luxon Advanced LXE-350 enclosure. Funny twist though with the new products in the Luxon Advanced series, they have less stellar features then this older enclosure. On the back of the device you'll find a 5V/12V DC power connector, as well as a mechanical power button, an eSATA 3G port and off course the USB 2.0 port which allows to have 4 different combinations attaching your external data, have a look:



Inside the box



Nothing fancy, the package, what matters is what's inside:

3.5" HDD External Enclosure

Stand

USB Cable

eSATA Cable

SATA to eSATA Adapter Cable w/ Bracket

Power Adapter

Power Cable

Screw Fitting Kit

Cleaning Cloth

User Manual



The screw fitting kit comes in very handy, not every one has torque screwdrivers at home and the difference between EU and US screws sometimes make it impossible to untighten these screws. The power adapter is made by Channel Well Technology and the model goes by the name of PAG 0342. It's an AC/DC converter with 12V 2A and 5V 2A outputs, good for a total of 34 Watt output power at roughly 75% efficiency. Input supply is universal compatible: 90~260VAC and 47~63Hz. It has overload and shortcut protection circuitry, operation temperature is in between 10~40°C, let's hope the latter one does not become a problem in long term usage.

Let's stop nagging about looks and features for now; it's time to for results ->