Test Setup and Test Methodology Intel Test Setup |
CPU | Intel Core 2 E6400 @ 2.8Ghz (from CSMSA) |
Cooling | Coolermaster Hyper TX |
Mainboard | Intel 975X Bad Axe (Modded by Piotke) |
Memory | 2 * 1Gb PC6400 OCZ |
Other | Geforce 7900 GT + Zalman VF900 @ 5v Coolermaster Real Power M520 520W PSU 2x Western Digital 74Gb Raptor SATA HDD
|
Room temperature was 20°C during testing, ambient noise clocked in at 36dBA. Noise measurements were taken at 50cm from the front of the case.
Realtime HDR and Orthos were used to stress the Dual Core system; Core 2 Temp was used to monitor Core temperature (duh) and Speedfan to check the temperature of HDD and Motherboard. Rivatuner’s temp monitor checked the G80 GPU at regular intervals. Maximum values were recorded.
The Intel Bax Axe motherboard features several thermal sensors, the “mobo” values are those recorded by the sensor which can be found between the DDR2 memory banks, marked
A in the overview:
Cable Routing & Larger VGA CardsAs the Antec Three Hundred is as long as the Nine Hundred we weren’t expecting any troubles; and while it is a tight fit, and you might not be able to place a 3.5” HDD directly behind the VGA card, there is room enough to maneuver around.
Onto the stress tests ->