Fanless and Silent

Passive cooling, no fan noise at all

Perfect to be used in noise-sensitive environments

Fanless, dust-free and thus virtually maintenance-free

 

Low Power Consumption

Power consumption in idle mode with 2.5" SSD under Windows 10: ca. 6 W only

 

24/7 Nonstop Operation

This device is approved for 24/7 permanent operation.

Requirements:

- Free circulation of air amongst the PC must be guaranteed.

- Ventilation holes must stay clear.

- If a hard disk is installed, this must also be approved for permanent operation by its manufacturer

 

Chassis

Slim-PC with black steel chassis

Without cooling fan, passive cooling only

The bays for memory, 2.5" drive and M.2 card

can easily be accessed by removing two cover plates.

Dimensions: 200 x 165 x 39.5 mm (LWH) = 1.3 litres

Weight: 1.5 kg net and 2.2 kg gross

Two holes for Kensington Lock and numerous threaded holes (M3) at both sides of the chassis

 

Operating Position

1) Vertical: Usual operating position with the supplied feet (DisplayPort output facing up).

2) VESA-mounted: The device can also be mounted behind an appropriate monitor using the supplied VESA mount kit.

Note: From a thermal point of view horizontal operation is permitted. However, there are no rubber feet on the device. The maximum operating temperature is 35 degrees Celsius then.

 

Operating System

This barebone system comes without operating system.

It is compatible with Windows 10/11 (64-bit) and Linux (64-bit).

 

Processor

Model: Intel Core i7-10510U (ULV)

System-on-a-chip architecture (SoC) with integrated memory and graphics controller

FCBGA1528 package - directly soldered onto the mainboard

Code name: Comet Lake U (10th Generation Intel Core)

Cores / Threads: 4 / 8

Base frequency: 1.8 GHz

Max. Turbo frequency: 4.9 GHz

Intel Smart Cache: 8 MB

TDP wattage: 15 W maximum

Manufacturing process: 14nm

Maximum Tjunction Temperature: 100 °C

Supports 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2

 

Integrated Graphics

Intel UHD Graphics

GPU clock frequency: 300~1150 MHz

Execution Units (EUs): 24

Supports DirectX 12, OpenGL 4.5

Supports full H264, H265 8/10 bit, VP8/9, VC-1, AVC hardware decoding

Supports Quick Sync Video and Clear Video HD technology

Supports up to three independent screens:

1) DisplayPort 1.2 supports Ultra HD @ 60 Hz

2) HDMI 2.0a supports Ultra HD @ 60 Hz

3) D-Sub/VGA supports analog displays

 

Mainboard / BIOS

Shuttle Mainboard FS20

All capacitors are high quality solid capacitors

Supports resume after power failure

Supports Wake on LAN (WOL)

Supports Power on by RTC Alarm

Supports boot from M.2 SSD cards und USB devices

AMI BIOS in 16 MByte EEPROM with SPI interface

Supports hardware monitoring and Watchdog function

Supports Unified Extensible Firmware Interface (UEFI)

Supports Firmware-TPM (fTPM) Version 2.0

 

Power Adapter

External 65 W power adapter (fanless)

Input: 100~240 V AC, 50/60 Hz, max. 1.6 A

Output: 19 V DC, max. 3.42 A, max. 65 W

DC cable length: ca. 170 cm

AC cable length: ca. 170 cm (3-pin Micky MM C6 and Schuko earthed safety plug)

 

DC Input connector

DC Input Connector: 5.5 / 2.5 mm (outer/inner diameter)

The DC-input of the computer supports an external

power source with either 12V+/-5% or 19V+/-5%.

 

Memory support

2x SO-DIMM slot with 260 pins

Supports DDR4-2666 (PC4-21300) SDRAM at 1.2 V

Supports DDR4-3200 at 2666 MHz

Supports Dual Channel mode

Supports a maximum of 32 GB per DIMM,

Maximum total size: 64 GB

Supports two unbuffered DIMM modules (no ECC or registered)