Chassis

Slim PC with black chassis made of metal

Dimensions: 190 x 165 x 43 mm (LWH) = 1.35-litre

Weight: 1.3 kg net and 2.1 kg gross

Two holes for Kensington Locks and numerous

threaded holes (M3) on both sides of the chassis

 

Power Adapter

External 90 W power adapter (fanless)

Input: 100~240 V AC, 50/60 Hz

Output: 19 V DC, 4.74 A, max. 90 W

DC Connector: 5.5/2.5 mm (outer/inner diameter)

AC mains cable: 3 pins, ca. 1.7 m length, with C5/C6 coupler (called "Mickey Mouse" or "Clover-leaf") for the power adapter and CEE-7/7 plug with earth-contact (type E+F) for the power outlet

 

Operating System

This system comes without an operating system.

It is compatible with Windows 10/11 and Linux (64-bit)

 

Processor

Model: Intel Core i5-1135G7 (ULV)

System-on-a-chip architecture (SoC) with integrated memory and graphics controller: no chipset required

FCBGA1449 package - directly soldered onto the mainboard

Code name: Tiger Lake U (11th Generation Intel Core processors)

Cores / Threads: 4 / 8

Base Frequency: 2.4 GHz

Max. Turbo Frequency: 4.2 GHz

Intel Smart Cache: 8 MB

TDP wattage: 28 W maximum

Manufacturing process: 10 nm SuperFin

Maximum Tjunction Temperature: 100 °C

 

Integrated Graphics

Intel Iris Xe Graphics

Max. GPU clock frequency: 1.3 GHz

Execution Units (EUs): 80

Supports DirectX 12.1, OpenCL 2.0

Supports up to four independent screens via HDMI 2.0b at 4096x2304@60Hz

 

Processor cooling

Heat sink with 50 mm fan (temperature-controlled rotation speed)

 

Mainboard

Mainboard in a Shuttle form factor proprietary design for the XPC DH32Ux

Solid Capacitors for sensitive areas provide excellent heat resistance for enhanced system durability

 

BIOS

AMI BIOS, SPI Interface, 32 MB Flash-EEPROM

Supports Hardware Monitoring and Watchdog functionality

Supports Firmware-TPM (fTPM) v2.0

Supports boot up from external USB flash memory

Supports Unified Extensible Firmware Interface (UEFI)

Supports power on after power failure

 

Memory support

2x SO-DIMM slot with 260 pins

Supports DDR4-3200 (PC4-25600) SDRAM at 1.2 V

Supports Dual Channel mode

Supports a maximum of 32 GB per DIMM,

maximum total size: 64 GB

 

Drive bay

1x 6.35 cm / 2.5" storage bay supports one hard disk or SSD drive with SATA connector

Device height: 12.5 mm (max.)

 

SATA connectors

1x Serial-ATA III, data transfer rate max. 6 Gb/s (600 MB/s)

With Serial-ATA power connector (onboard)

 

M.2-2280M SSD slot

The M.2-2280M slot provides the following interfaces:

- PCI-Express Gen. 4.0 X4, supports NVMe

- SATA v3.0 (max. 6 Gbps)

It supports M.2 cards with a width of 22 mm

and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).

Supports M.2 SSDs with SATA or PCI-Express interface

 

M.2-2230E slot for WLAN cards

Interfaces: PCI-Express Gen. 2.0 X1 und USB 2.0

Supports M.2 cards with a width of 22 mm and a length of 30 mm (type 2230)

Supports WLAN expansion cards (optional Shuttle accessory: WLN-M/M1)

 

Audio

Audio Realtek® ALC662/ALC888S 5.1 channel High-Definition Audio

Two analog audio connectors (3.5mm) on the front panel:

1) 2-channel line-out (headphones)

2) microphone input

Digital multi-channel audio output: by HDMI

 

Dual Gigabit LAN Controller

Dual network with two RJ45 ports with two status LEDs each

Used network chips: 2x Intel i211 Ethernet Controller (MAC, PHY) with PCIe interface

Supports 100 / 1.000 MBit/s operation

Supports WAKE ON LAN (WOL)

Supports network boot by Preboot eXecution Environment (PXE)

Supports Teaming mode

 

Card Reader

Integrated card reader

Supports SD, SDHC and SDXC memory flash cards

 

Front Panel connectors

Microphone input

Audio Line-out (headphones)

4x USB 3.2 Gen 2, max. 10 Gbps (red)

SD card reader

Power button

Power LED (blue)

HDD LED (yellow)

 

Back Panel connectors

4x HDMI 2.0b connector

Optional: 1x D-Sub VGA connector (Accessory PVG01)

4x USB 3.2 Gen 1, max. 5 Gbps (blue)

2x Gigabit LAN (RJ45)

2x RS232 serial port, 9-pin D-Sub (5/12V, 1x RS422/RS485)

1x DC-input connector for external power adapter

1x 4-pin connector (2.54 mm pitch) supports:

- external power on button

- Clear CMOS function

- +5V DC voltage for external components

2x perforation for optional Wireless LAN antennas

2x hole for Kensington Lock (on the side)

 

Other onboard connectors

1x jumper JP2 for power-on-after-power-fail (hardware solution)

1x analog VGA graphics output CN6 (2x 10-pin, 1 mm pitch)

2x serial interface (COM) occupied by backpanel connectors

1x USB 2.0 (4-pin) for optional accessory WWN03 (LTE kit)

1x fan connector (4-pin) occupied by the CPU fan

1x connector for CMOS battery (occupied)

 

Supplied Accessories

Multi-language user guide (EN, DE, FR, ES, JP, KR, SC, TC)

VESA mount for 75/100 mm standard (two metal brackets)

Four screws M3 x 5 mm (screws together VESA mount and PC)

Four screws M4 x 10 mm (to affix VESA mount on the PC)

Four screws M3 x 4 mm (to mount a 2.5" storage device into the bay)

Two screws M3 x 5 mm (silver colour, to mount two M.2 cards)

Driver DVD (Windows 64-bit)

Serial ATA cable for 2.5" drive including power cable

External 90 W power adapter with power cord

 

Optional Accessories:

- PVG01: optional D-Sub VGA video output

- WLN-M / WLN-M1: WLAN module in M.2-2230 format supports WLAN and Bluetooth with two external antennas.

- WWN03: LTE adapter kit with antennas, but without LTE card

- PS02: Stand for vertical operation

- CXP01: adapter cable for external power button

- PRM01: 2U rack mount front plate for two Shuttle XPC slim PCs

- DIR01: DIN-Rail mounting kit

 

Environmental Specifications

Operating temperature range: 0~50 °C

Relative humidity, non-condensing: 10~90 %