M.2-2230E slot for WLAN cards
Interfaces: PCI-Express Gen. 2.0 X1 und USB 2.0
Supports M.2 cards with a width of 22 mm and a length of 30 mm (type 2230)
Supports WLAN extension cards (optional Shuttle accessory: WLN-M)
Audio
Audio Realtek® ALC 662 5.1 channel High-Definition Audio
Two analog audio connectors (3.5mm) on the front panel:
1) 2-channel line-out (headphones)
2) microphone input
Digital multi-channel audio output: by HDMI and DisplayPort
Dual Gigabit LAN Controller
Dual network with two RJ45 ports
Used network chips:
2× Intel i210-AT Ethernet Controller with MAC, PHY and PCIe interface
Supports 10 / 100 / 1.000 MBit/s operation
Supports WAKE ON LAN (WOL)
Supports network boot by Preboot eXecution Environment (PXE)
Supports Teaming mode
Card Reader
Integrated card reader
Supports SD, SDHC and SDXC up to v3.01 memory cards
UHS-I interface supports up to 104 MB/s (SDR104) transfer speed
Realtek RTS5227S chip with PCIe chipset interface
Supports boot up from SD card.
Front Panel connectors
Microphone input
Audio Line-out (headphones)
2× USB 3.2 Gen 2 Type-A (red)
1× USB 3.2 Gen 1 Type-A (blue)
1× USB 3.2 Gen 1 Type-C
SD card reader
Power button
Power LED (blue)
HDD LED (yellow)
Back Panel connectors
1× HDMI 2.0a connector
2× DisplayPort 1.2 connector (DP)
Optional: 1× D-Sub VGA connector (Accessory PVG01)
2× USB 3.2 Gen 2 Type-A (red)
2× USB 3.2 Gen 1 Type-A (blue)
2× Gigabit LAN (RJ45)
2× RS232 serial port, 9-pin D-Sub (5/12V, 1× RS422/RS485)
1× DC-input connector for external power adapter (supports 19V±5%)
1× 4-pin connector (2.54 mm pitch) supports:
- external power on button
- Clear CMOS function
- +5V DC voltage for external components
2× Perforation for optional Wireless LAN antennas
2× hole for Kensington Locks
Other onboard connectors
1× jumper for power-on-after-power-fail (hardware solution)
1× analog VGA graphics output CN6 (2× 10-pin, 1 mm pitch)
2× serial interface (COM) occupied by back panel connectors
1× USB 2.0 (4-pin) for optional accessory WWN03 (LTE kit)
1× fan connector (4-pin) occupied by the cooling system
1× connector for CMOS battery (occupied)
Supplied Accessories
Multi-language user guide (EN, DE, FR, ES, JP, KR, SC, TC)
VESA mount for 75/100 mm standard (two metal brackets)
Four screws M3 × 5 mm (screws together VESA mount and PC)
Four screws M4 × 10 mm (to affix VESA mount on the PC)
Four screws M3 × 4 mm (to mount a 2.5" storage device into the bay)
Two screws M3 × 5 mm (silver colour, to mount two M.2 cards)
Driver DVD (Windows 64-bit)
Serial ATA cable for 2.5" drive including power cable
External 90 W power adapter with power cord
Protection cap for CPU socket (do not use if heatpipe or fan is mounted)
Heatsink compound
Optional Accessories
- PVG01: optional D-Sub VGA video output
- WLN-M. WLAN module in M.2-2230 format supports IEEE 802.11ac and Bluetooth 4.0 with two external antennas.
- WWN03: LTE adapter kit with antennas, but without LTE card
- PS02: Stand for vertical operation
- CXP01: adapter cable for external power button
- PRM01: 2U rack mount front plate for two Shuttle XPC slim PCs
- DIR01: DIN-Rail mounting kit
Environmental Specifications
Operating temperature range: 0~50 °C [6]
Relative humidity, non-condensing: 10~90 %